Question about Maytag MDB7100AWB Dishwasher
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: rusty racks
Check your warranty to see if it covers your racks. Some models have a longer warranty against rack rusting if you have Duraguard racks. If they are Dura guard racks and still under warranty, Maytag will replace them at no charge.
Posted on Nov 18, 2007
This is Maytags solution
Do the dishwasher racks have chips or scratches showing exposed metal underneath?
If minor rack repairs are needed, a dishwasher rack repair kit just might work. To review this product or purchase the kit, click here.
Should you purchase the kit online, enter Promo Code F9A75Q4 in the Review Order screen when you check out to receive a 10% discount on your order.
For more severe rack damage, a replacement rack may need to be purchased; call the Maytag Customer eXperience Center toll-free at 1-866-616-2601, Monday-Friday, 8AM-6PM, Eastern Time.
I would call the toll free number and see if a free replacement is available. If not at least try to get a big discount on replacing them.
Good luck and thanks for using Fix Ya, please take the time to rate this solution (from Fix Ya, not Maytag, I didn't like their solution).
Posted on Feb 06, 2009
I have had the same problem and there is a simple fix.
The problem in my case was the floating water sensor was stuck and gummed up with grease.
On the bottom of the dishwasher, in the front right corner there is a round doughnut-looking thing. This is the water level sensor. It is open on the bottom, and grease collects there.
When this happens, the air pocket is too small, and the float won't float. then the dishwasher overflows. To clean it: just reach under with your finger, and scoop out the grease.
Sometimes, after doing this, the float then gets stuck in the "up" position. When this happens, the dishwasher completely drains, and the heater element for the dishwasher is exposed, and food cooks onto it, and that is where the smell is coming from.
Posted on Oct 20, 2009
Tips for a great answer:
Sep 24, 2012 | Maytag MDB3100 Dishwasher
Dec 06, 2009 | Maytag MDB6650A Built-in Dishwasher
Jun 07, 2009 | GE Profile PDW9880NSS Stainless Steel...
Feb 17, 2009 | Maytag Dishwashers
Feb 05, 2009 | Maytag 24 in. PDC3600A Built-in Dishwasher
Aug 27, 2008 | Dishwashers
Mar 02, 2008 | Dishwashers
Oct 02, 2007 | Maytag MDB7100AWB Dishwasher
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: