Question about Saniflo & Saniplus& Macerator Pump

1 Answer

Saniflo works in short burst when not flushed eg in night

The saniflo starts to work even when no one has use the system this happens about once an hour

Posted by on

  • Anonymous Mar 16, 2014

    gurgling in toilet after flushing using saniflo plus

  • Anonymous Mar 30, 2014

    Saniflo does not come on immediately its a few minutes before it starts to work and shower is backing up

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Sound to me that the toilet is over filling and in doing so water will over flow down the pan. This is definately what I would check first!

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a saniflo system I just installed....what is the best type of toilet paper to use? And should I flush the toilet more than once to insure it stays clean?


many consumers prefer Charmin ultra soft .not necessary unless it doesn't go down the first time . Just wasting water .

Oct 04, 2015 | Saniflo Toilets & Bidets

1 Answer

We have a basement bathroom. The bath drains away very slowly, but everything else seems fine - toilet and sink draining/flushing fine. Can we use a usual unblocker (eg sodium hydorchloride) to unblock?


I worked on a lot of Saniflo products, they do not recommend using any products that have bleach or chlorine. Make sure the flapper inside the side inlet where the bath drains, is not obstructed.

Dec 03, 2012 | Saniflo & Saniplus& Macerator Pump

1 Answer

Saniflow system keeps frequently flushing even when the system isn't being used. the system is working normally but it keeps flushing through the day and night.


Need to check the flapper inside the toilet tank. this is what opens when you press on the toilet handle. you may need to replace it or replace the whole flush valve assembly.

Nov 07, 2010 | Saniflo Toilets & Bidets

2 Answers

Our saniflo system works ok, its just when left idle, the pump seams to start up every 40 secs. I've flushed it and held up the ball **** and it stills does it. Any ideas?


One thing to check is the check valve may be leaking back, float may be faulty, toilet maye be leaking and filling tank causing pump to come on.

Check out this link with a trouble shooting guide for this unit.

This first kink has information on different types of Santiflo systems.

http://www.saniflo.com/Downloads.aspx

This next link has a trouble shooting guide that covers these issues.
http://www.saniflo.com/pdf/install/PLUS_US.pdf

Jun 24, 2010 | Saniflo & Saniplus& Macerator Pump

1 Answer

Saniflo Top: Pump


indicates perhaps a faulty pressure switch. otherwise: this happens often in hard water areas due to build up of limescale. Use a descaling agent (acidic) to clean the saniflo - can be introduced via the toilet bowl.

Apr 02, 2010 | Saniflo & Saniplus& Macerator Pump

1 Answer

When flushed pump starts water goes but pump keeps running when level is reached


pump keeps running - again this is indicative of a dirty / scaled saniflo. You need to clean / descale the saniflo. if this does not work then an outlet pipe blockage (22mm) may have occurred (unlikely if the unit is operating ok). Saniflo sell their own cleaner, which can be introduced via the wc bowl. If this does not work, then its time for a proper clean ( remove unit, jet clean, acid descale, wash, replace). Obviously not everyones cuppa tea.

Oct 27, 2009 | Saniflo & Saniplus& Macerator Pump

1 Answer

Sanibest toilet is LOUD when flushed


Shut down the power and pull the pump from the unit and give it a exam. There might be something as simple as a item that was flushed down the toilet (pencil, pens, combs, etc.) or just a hair clump. Check that the float is free to track fully up and down. Good Luck!

May 17, 2009 | Saniflo 013/003/005 Sanibest Toilet with...

1 Answer

Toilet pumps bursts of water


either your fill valve needs replaced or your flush valve needs replaced

May 13, 2009 | Saniflo 013/003/005 Sanibest Toilet with...

1 Answer

Saniflo ejector experiencing shaking when flushed


I have included the installation instructions. It also includes an expanded veiw of the toilet. The troubleshooting area can give you ideas. From what I read, it is possible that something has feel into the grill. Hopefully this helps.
http://www.saniflo.com/pdf/install/PLUS_US.pdf

Apr 18, 2009 | Saniflo 002/005/007 Saniplus Toilet with...

Not finding what you are looking for?
Saniflo & Saniplus& Macerator Pump  Logo

Related Topics:

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saniflo Toilets & Bidets Experts

deriuduo

Level 1 Expert

26 Answers

paulcarew

Level 3 Expert

1898 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Saniflo Toilet and Bidet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...