Question about HP DesignJet 1050c plus InkJet Printer

1 Answer

Hi the print not complet and make black line

Hi i have plotter hp1050cplus and was good working but now when i want to print it s make half of the print thin make black line thin move out the paper thin cut it
can any one help me.............

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 53 Answers

Its difficult to see the actual problem, but this looks like a corrupt file. Go firstly to yout driver, right click on it , go to properties and then click on "print a test page" if this prints correctly then its the actual file, try another file/drawing. If this does not print correctly then I would reinstall the driver. If it still does not work then try another PC. I dont personally think you have a plotter problem, its one of the above.
Dave

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black printhead out of line. Prints staggered lines


A long story, short answer: probably you have a problem in your printer. You should take it to a repair service and hoe repait kit is available for this model.

Apr 14, 2015 | HP DesignJet 110 Plus InkJet Printer

1 Answer

White lines in my printing and sometimes smudges of black ink


Hi
First before you buy a new cartridge,try doing a 'printhead' cleaning on your machine.Sometimes the printheads need cleaning clogginl.

Mar 03, 2012 | Printers & Copiers

1 Answer

I have a hp 450c plotter and it will not print.


Has this USB to Centronics cable worked in the past, but has now stopped?
The reason I ask is that there are two kinds of parallel ports, and so two kinds of USB-to-Centronics adapators. One is unidirectional, and one is bidirectional. If your plotter requires bidirectional, then it won't work properly with unidirectional.

Jun 10, 2010 | HP DesignJet 450c InkJet Printer

1 Answer

My printer won't complete the cartridge alignment function. It only prints the first two bars and then stops. When printing the black cartridge looks faded and half printed lines across even though it is a...


My printer does the same thing. I changed the blank ink yesterday (the printer shows the black ink was low) however after trying and trying and not being able to complete the alignment I decided to change the color ink as well.
It worked. Printer works fine now. Sometimes the ink dries up and you have to change it even though you know it should last longer.
Give it a try and let me know.
laura@theprincessandthepup.com

Sep 12, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

When i'm going to print an autocad 2009 document to the hp 500 printer with jis b0 format and biger the spooler of the printer crashes and doesnt print


If you are using Windows Vista OS, then you know that you do not have the complete drivers that should make all the features of the plotter work ok. It is recommended that you go for XP or 2000. That way, better results including fonts are achieved. Remember also that this model is old and may not really work very well with all the features in Autocad 2009 Version. You can try the plotter on a machine running on 2007 version. Good luck

Apr 29, 2009 | HP DesignJet 500ps (42 in.) InkJet Printer

1 Answer

Plotter only printing in Cyan


Check your black cartridge. Do the pump the cartridge thing with the plunger on the left of the plotter. Check all the electrical connectors on the cariage and the cartridge - clean with water -or wd40 if you are very careful and check that all the contacts, about 40 of them are clean and undamaged on each cartridge. Replace with known working cartridges. run a color test as specified in the manual -- hp has relased the manual for this printer as they no longer service this unit.

Jun 23, 2008 | HP DesignJet 450c InkJet Printer

1 Answer

Dell A940 smeared printing


Our Dell AIO A940 stopped printing black ink (it went throught the motions but he paper came out blank). Finally got it to print by selecting:

PRINT, PROPERTIES, PAPER SETUP, SPECIALTY PAPER, PHOTO/GLOSSY

Maybe it will work for you! Good luck!

Dec 11, 2007 | Dell A940 All-In-One InkJet Printer

Not finding what you are looking for?
HP DesignJet 1050c plus InkJet Printer Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...