Question about Viking Stove / Oven / Range Bake Element - PJ010006

Open Question

Replacing element on viking range

OUr element got broken and we need to replace it. I found the part but was wondering if the element just pulls out or if it has screws.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
appldoctom
  • 311 Answers

SOURCE: Replacing heating element in oven-connecting wires fell back in

hey sorry about that,as a repair man i hold on to those babies like crazy.almost all ovens i worked on [its many]the rear wall dose not come apart.if yours dose great go that way.but other wise yes you have to go thru the back.i would try fishing abit more before i pulled it out if was me.God bless,tom

Posted on Jan 02, 2009

Ad
  • 30 Answers

SOURCE: replacing PB010036 Bake / Broil Thermostat Viking

you do not need to take apart any switches, all you need - unplug it from power, open front panel (2 screw on each side) remove all knobs, there is 3 more screws behind them). unscrew thermostat 2 screws behind knob. open top part of stove, remove grates and cover. you will see wires to thermostat unplug them and plug one by one to new thermostat. remove old thermostat from inside the oven (it has bracket inside). put the new one. close everything back.
appliancesrepairla.com - viking repair LA

Posted on Jul 02, 2010

TheMobilian
  • 8220 Answers

SOURCE: bad lower oven element

Directions

Posted on Jul 03, 2010

blackmar
  • 235 Answers

SOURCE: Replacing lower oven element in

The wiring should be safe with the oven off, but it is always better to be 100% sure and turn the power off at the switchboard.

Posted on Feb 19, 2011

mksoccercity
  • 1 Answer

SOURCE: How do I replace a broken stem on the griddle knob

You would remove all of the knobs and then you remove the screws holding the face panel on there. Then you can access burner valves. The new part may not come with a preset orifice because the factory does not know which type of gas you have. So what they do is tighten the orifice all the way down. Lets see if I have a viking service manual:

Posted on Oct 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Eaton Viking stove that has a broken baking element. Is there anyplace that can supply one for me.


Amazon or direct

Amazon.com: Bake Element for Viking Range, PJ010004: Appliances

https://www.amazon.com/Bake-Element-Viking-Range-PJ010004/dp/B00OJ5VL0U
Rating: 4.8 - ‎17 reviews
Buy Bake Element for Viking Range, PJ010004: Range Parts & Accessories - Amazon.com ? FREE DELIVERY possible on eligible purchases.

Viking Parts by Viking - Factory Parts for Viking Appliances

www.allvikingparts.com/ Need a part for a Viking Range, Stove, Oven, Grill, Refrigerator or Dishwasher? We stock thousands of Genuine Viking parts.

Locate Your Viking Model and Serial Number - Allvikingparts

https://www.allvikingparts.com/Articles.asp?ID=142 What do Viking Model Number and Serial Numbers Look Like? Viking ... For Viking Open Burner Ranges and Rangetops(You have an Open Burner Range or ... Eaton Viking stove Google Search

Mar 13, 2017 | Heating & Cooling

1 Answer

I have the part to replace broken heat element on Amana 6100; where are the screws holding it in place?


Replace Amana NED7200TW Heating Element Heater Coil ...

? 10:43
https://www.youtube.com/watch?v=5469BpQpJZQ
Dec 14, 2014 - Uploaded by Mike Griswold
How to replace the heating element on your Amana NED7200TW Dryer. ... Pulled apart my dryer and ...

Oct 31, 2015 | Amana Kitchen Ranges

1 Answer

Eaton viking imperial electric,stove oven door will not close completelty; circa 1996. are replacement hinges still availible?


To the owner of the Eaton Viking stove RS3028W-1, yes you CAN get replacement hinges!
I too, have this stove model (circa 1996) with exactly the same problem and I have spent the past 18 months looking for replacement oven hinges. I was very frustrated at the thought of having to throw out a stove that cooks and bakes wonderfully and has not needed any repairs till now and having to buy one of the new subpar ones that constantly need repairs. Plus you can't do canning on the new stoves and the few remaining coil models are extremely poorly made.
I have found 2 places that carry the hinges.
1. Reliable Parts, 1-800-663-6060. This company is located in Montrea (St. Leonard), Quebec.
2. Appliance Shark, 1-800-663-1176. This company is located in Barrie, Ontario.
The part number for the hinge is: 318-024-741

I hope this is helpful, and may you have many more years of happy cooking on this great stove.

Sep 17, 2014 | Eaton Computers & Internet

1 Answer

The heating element on my Frigidaire RBE-97N has cracked and broken. How easy or hard is it to replace it?


I assume it is the bake element. These are very easy to replace. make sure the power is off and you can access the screws from the oven cavity. remove the screws, pull gently on the element. If the wires are long enough you should be able to disconnect them or unscrew the wires from the terminals. reattach the wires to the new element. reinsert it back in place and there you go.

Nov 24, 2013 | Frigidaire Ovens

1 Answer

Kenmore stacked laundry unit. when it was plugged in sparks flew and small parts of the heating element fell and the power cord is ow black. can we replace cord and be ok


Heating element must be replacedas well as the cord. Make sure the drum screws were not screwed into anything electrical.

May 18, 2013 | Kenmore Dryers

1 Answer

Indesit IDL500 not heating (element is fine)


It's usually behind the control panel you have to remove the screws on the door

Jan 03, 2018 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Element does not heatup


I once had a similar problem with this electric smoker and i called Masterbuilt and they said they no longer sell the elements. you have to buy the cabinet @ $189 for the 40" model. I decided to pull my element and see if i could find one that would work by going to an appliance repair parts store.

When i pulled the element, i found that the terminal that plugs into the element was burned/melted in two. i replaced the terminal end, pluygged it in and it is working fine.

to remove the element, you need to remove the element cover/chip loading chute first. its easy, 2 sheet metal screws and 2 nuts and 2 machine screws. one of the nuts/machine screws is a little hard to get back on when you reassemble but it can be done. after the cover is removed, you will see 3 screws where the element goes through the back wall. only removed the left and right ones. do not loolsen or remove thecenter one. after you remove the 2 screws, you can coax a small amount of the wire leads out into the open and you can inspect them to see if they are broken.

if the problem is truly a bad element, you will have to find an element somewhere.

Sep 25, 2010 | Masterbuilt 20070106 Electric Smoker

1 Answer

We need to replace the baking heating element of an electric ge oven. The model number is jsp27004ad and the part is 3358. We wonder how difficult this is to repair. Can we do this ourselves? Is it...


Yes you can - yes it is worth it. First unplug or turn the breaker off to your unit. The bottom bake element is held in by 2 screws at the back of the oven. remove both of them and gently pull out the element a little. there are 2 wires attached to the element either by 2 more screws or push in connectors.

A lot of the time you can see where the element is burned out but sometimes you may have to check it for continuity with an ohm meter to tell if it is bad.

Jul 20, 2010 | GE Ovens

2 Answers

Difficulty level replacing the bake element Kenmore 911.4088816


this is a 15 to 20 min job for you ,.. turn off the power . remove the screws holding the element and slide it out till the wires or exposed . remove the and install them on the new element .( do not let them slide back in /) reinstall the element and you are done . you have done a good job . mm

Jul 13, 2010 | Kenmore Ovens

Not finding what you are looking for?
Viking Stove / Oven / Range Bake Element - PJ010006 Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viking Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

684 Answers

yadayada
yadayada

Level 3 Expert

78919 Answers

Irene Tulloch

Level 2 Expert

483 Answers

Are you a Viking Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...