Question about AEG Washing Machines

Open Question

Aeg lavamat 86700 error code C3 IS ON - AEG Washing Machines

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: CA Error Code - AEG OKO LAVAMAT 86700

c-a error message poped-up.washer stop working.............please help.

Posted on Nov 18, 2008

  • 3230 Answers

SOURCE: AEG OKO Lavamat Update washing machine LAVALOGIC 1600

Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

Posted on May 06, 2009

  • 3230 Answers

SOURCE: AEG Lavamat 86720 washing machine

Hello,
This means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

post further comment for more help......

Posted on May 06, 2009

  • 1 Answer

SOURCE: my AEG lavamat 74620 doesnt fill up with water

I have the same problem but I think it is the Gears the orange cog goes up and the yellow than slips, clicking noise, I put some washers on top to hold them down more and the water is going in to the washer.

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?


Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Aug 24, 2014 | AEG Washing Machines

2 Answers

AEG Lavamat 11842 Error code E66


http://bastlman.wz.cz/2010/08/AEG-Lavamat-error-codes.html

Feb 23, 2013 | AEG Washing Machines

1 Answer

Hi my AEG OKO-LAVAMAT 88830 is about 10n years old. Today I was cleaning my machine. I filled the machine up with water on the rinse cycle then turned it to pump. I did this a few times as I have had a...


Hi from retired Englishman in SW France,

According to my list for AEG Lavamat washers, 'C3' stands for 3 possible causes 1 'safety flood device operated' (I suspect it means that it has sensed some water in the bottom tray. Not an easy job to do but I would check for a leak underneath), 2 'pump fault' and 3 'module fault'. Sorry I can not be of more help ;-0(

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Sep 04, 2011 | AEG Lavamat 88840 Front Load Washer

1 Answer

Error code C3


LOOK IN YOUR MANUAL...IT SHOULD HAVE A SOLUTION TO THIS CODE..JUST FOLLOW INSTRUCTIONS...BEST OF LUCK..

Jan 11, 2009 | AEG Lavamat Lavalogic 1600 Front Load...

1 Answer

CA Error Code - AEG OKO LAVAMAT 86700


c-a error message poped-up.washer stop working.............please help.

Sep 15, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

AEG Oko Lavamat 86700


check the carbon brushes on the motor as when they are worn arcing occurs and this could trip the electric and the smell could be the plastic brush holders getting hot due to the arcing

Jul 15, 2008 | Washing Machines

1 Answer

Aeg washing machine fault code


This error code means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

May 08, 2008 | AEG L86800 Front Load Washer

1 Answer

AEG OKO Lavamat Update washing machine LAVALOGIC 1600


Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

Dec 10, 2007 | AEG L86800 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...