Question about Linksys Wireless-G Broadband Router

1 Answer

No Link button on Router

I have a wirless router up in my rooom that connects through wirless access points in my house. every access point has link and internet accept mine up until an hour ago and i cant fix it. What can i possibly do to get it working? Thanks

Posted by on

  • homeloanpgms Mar 11, 2009

    I have the Linksys Wirless g 2.4 broadband router. My problem is that I have a modem sent to me from Verizon, I cannot connect my router to the computer of the modem - no signal is getting through (connection to the internet) (when I switch the wires around)

  • JDTec
    JDTec May 11, 2010



    Do a power cycle. Pull the power connector out for about 30 secs. then plug it back in, it should link up with the router.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 112 Answers

Routers can only access so many adresses. Check the install disk and look at the router it may be a settings issue or too many devices.(not enogh info) You can link to your router by your computer and diagnose the problem.

Posted on Aug 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find my WPS button on my Wifi printer. I have pressed WPS on router but no different


where is the WPS button? - Canon Community

community.usa.canon.com/t5/Printer...Support/...WPS-button/td.../8893
Dec 27, 2012 - It asks for me to push the WPS button, but can't find? ... Now I am afraid to unplug the printer and move it back to my desk because it will ... starting only 2 days back, it was daily "dropping" my wifi connection with my MacBook.

WPS access point - Canon Community

community.usa.canon.com/t5/Wireless.../What...WPS.../11819
Jan 19, 2013 - What and where is the "WPS access point" button required to set up wififor the ... What and where is the "WPS access point" reqired to use wifi for the MX432printer .... My WPS button is on my the back of my router (blue button) ... I have a tp-link model tl-wr841n and I can't find the access point in the router ...

Connecting your HP wireless printer ' Wireless Printing ...


Nov 19, 2015 | Computers & Internet

1 Answer

Where is the access point on a pixma mg5422


Do you have a wireless router that has a 'WPS' button?
If so, press that button on the router, and press the similar button on the PIXMA, and the two devices should connect.

Jul 06, 2014 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Internet problem: I have configured my new TP LINK WA500G as an Access Point with DHCP enabled, connected to a router with fixed IP. All the tested devices (android tablet, WM phone, W7 and W XP...


please note that if your router DHCP is open you must close the access point DHCP if the twoic is open DHCP make a conflict and internet is stoped
best regards

Apr 21, 2011 | TP-LINK TL-WA500G 54Mbps Wireless Access...

1 Answer

I have a belkin g+ mimo router and am currently trying to set it up as an access point to interact with my d-link dir-615 router. when i add my d-link routers ip address string, the belkin disappears. i...


Hello...

Steps To Convert your Belkin Router as an Access Point.

- Connect your D - Link Router to your PC & Check the Default Gateway It Might Be 192.168.1.1 or 192.168.0.1

( Finding Default Gateway: Right Click on Local Area Connection & click on Status - Click on Details For Win 7 & Win Vista & For Win Xp - Right Click on Local Area Connection & Click on Status, Select Support Tab & Click on Details )

- Now Connect the Belkin router to your Com .. Open Internet Browser & Go to 192.168.2.1

- Towards your Left Corner Under Wireless Clink on Use as Access Point

- It will Prompt you For a Password Leave it Blank & Click on Submit

- Select the Radio Button Next to Enable

- In Specify IP Address Type in IP Address in Range of your D - Link Router Eg: 192.168.0.254

- Select Subnet Mask - 255.255.255.0

- Click on Apply Changes

- Now Open the Router Setup Page Using the Ip Address which you gave EG: 192.168.0.254

- Connect an Ethernet cable From your D - Link Router to Any 1 of the Wired Slots on the Router ( Note: We are using Wired Slot as we have Disabled the NAT on the Belkin Router It Gives you IP Address From your D - Link Router & the DHCP on the Belkin Router is Turned Off)

- Power cycle the D- Link Router & Belkin Router For 15 Seconds Each ( Unplug the Power cable & Plug it Back After 15 Seconds)

- Now go to the Router Setup Page & Check the Internet Status in the Top Right Corner It Would Be Connected.

- Try Going Online... :)

Feb 19, 2011 | Belkin Wireless G Plus MIMO (F5D9230-4)...

3 Answers

Can I add a 2nd wireless router at another location?


Your best bet is to use a wireless extender, this will extend the range.
Google search for these devices.

Feb 01, 2010 | D-Link AirPlus DI-614+ Wireless Router

1 Answer

How can I reconfigure my access point on my DI-624 to 802.11a?


First press reset button for 10 seconds it is in back side of router.
Then connect router to computer with ethernet cable then you can access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page.
Enable DHCP if you want to get ip from router for your LAN.
Go to wireless enable it .
Then enable wi fi security wep security then enter WEP key it is your password to connect internet .
Then save settings and restart router.
Let me know if you need more assistance.
Thanks.

Oct 01, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

2 Answers

Can I use a D-Link DI 634M as an access point?


Sure you can! As you can with any wireless router pretty much.

1. Assign the new router (AP) to an IP on your subnet that's not your existing router's IP... i.e. 192.168.0.2
2. Disable the DHCP server on the "AP"
3. Create a new wireless network on the "AP"
4. Plug your existing network/router into a LAN port

DO NOT USE THE WAN PORT

Voila! You have an access point!

Jun 21, 2009 | D-Link DI-634M Wireless Router (DI634M)

1 Answer

I want to use a second wifi router as an access point for my XBox


It might be better if you just get a 25-100 foot eathernet cable so you do not have to mess with a second wirless network system a may be a eathernet switch box.

Jan 04, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

How can I make a password for my D-Link 520T Router?


If you wanna go wireless and your router is not wireless, you can simply buy a wireless access point. Connect it to your router and it will give you wireless service, hence your laptop can connect wirelessly now. You can just buy a D-link wireless access point.

Nov 16, 2008 | D-Link DSL 500 (DSL-500) Router

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...