Question about Memorex MLT3221 32 in. LCD TV

5 Answers

No picture on Memorex MLTD3222 flat panel LCD.

Turn tv on, it displays "Memorex" very quickly, then goes black. No buttons on remote nor TV work except power. I have the MLTD3222 which is same except DVD player on side. I can not change input because nothing displays when I push it. I had my cable box hooked up with HDMI, speakers turned off as sound was going optic output to receiver...I got sound but no picture. So I tried component, composite, etc. but nothing worked because I can not get TV to display input function to change input source. I have unplugged the TV and all that to try and get it back to out-of-the box settings, but it just displays Memorex real fast and that is it.\
After trying all kinds of input configurations, I finally got video two input to give me sound. Nothing gives me a picture. Video two (back panel) is the third input source from input menu per manual. I do not know why it is on that one. oringinally I had it as HMDI 2 when problem started (11th input source on menu).
I

Posted by on

  • 6 more comments 
  • Anonymous Jan 29, 2009

    I have the same tv and the same exact problem.

  • ida_robbie Feb 01, 2009

    My granddaughter did something with the remote and I have sound but no picture. I tried shutting off and nothing haooens. memorex flashes on screen then it goes to black with just sound??

  • caparlopo Apr 09, 2009

    No picture on Memorex MLTD3222 flat panel LCD only audio

  • Anonymous Apr 20, 2009

    MLTD3222 from target. 6 months old and same problem. I get sound but no video. memorex name flashes on startup so display should be working but no video after the memorex screen

  • Anonymous May 01, 2009

    same as others .

  • Anonymous May 02, 2009

    Same problem here, exactally as described above. Very frustrating, but after 30-45 minutes of POWER ON/POWER OFF, the picture eventually comes on.

  • tony_kahle May 05, 2009

    I have the same TV with the same problem, is there something I can do to make it work again or do I have to return it for professional repair?

  • ccb589499 May 10, 2009

    Same thing. This happened before and then a few days later the screen came back on. It is frustrating since you can't use the functions on the side of the tv when there is a blank screen. I also only had this tv for less than 6 months.

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I recently got this tv from somone because of this exact problem. I have found a solution that works for mine. You can check to see if it works for you also. What I did was take of the back cover. 3 screws (1 big one in the center and 2 little ones below it). Next look at the power board. If plugged in and turned on the red light on the power board should be lit up. If so your power board is fine. Next find the component that has 4 switches. I manually turned these on and turned the tv on and it worked! Has been working ever since!

Posted on Jun 27, 2010

  • 12 more comments 
  • 4crrt Oct 05, 2010

    This solution has worked for me so far. I must add that I was hesitant to move those switches (on SW1 of the power board), but once I did, the picture came back. However, after returning all 4 of the switches back to off, I still have a picture. This leads me to believe that there is a faulty component on the board (or within the device) that is "reset" by these switches. I'm certainly not a guru and I'm still tempted to spend the $66.51 plus shipping from Sears for a reconditioned updated replacement board. I guess I'll wait to see how long this fix lasts. Next time, Samsung, Sharp, Toshiba for sure.

  • sassygirl56 Oct 19, 2010

    Wat if there is no switches?

  • eze2000 Jan 29, 2011

    I see the 3 normally open switches of SW 1 on the circuit board there is no component soldered in place. Question is do I need to make 3 jumpers and attach to board or did your set have dip switches in this location?

  • carranzak Mar 16, 2011

    where are these 4 switches at

  • m2mmma Aug 27, 2011

    Can't believe so many have the same problem. Where are the switches located? I have the back off and don't see "switches".

  • rick Jan 03, 2012

    What's the solution if their are no switchs on SW1?

  • ragnarok818
    ragnarok818 Jan 03, 2013

    what is this component? I am not seeing anything with four switches.

  • ragnarok818
    ragnarok818 Jan 03, 2013

    where is this component with 4 switches located?

  • Nick Brady Jun 04, 2013

    the component is a pink box on the bottom left corner of the supply power board. Near the box will be a red indicator light.

  • Nick Brady Jun 04, 2013

    power supply board*

  • ROCK7255 Aug 18, 2013

    i don't see switches only sodder dots s1 s2 s3 and blank

  • Alta Waren Montgomery
    Alta Waren Montgomery Nov 04, 2013

    I did the above and it did NOT work for me. Any more sugestions?

  • Alta Waren Montgomery
    Alta Waren Montgomery Nov 04, 2013

    thank you jadehe but it did nit work read above

  • Payton Smyly
    Payton Smyly Jan 09, 2014

    where are these switches???

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am having the same problem... never happened before and I've had the TV for about 2 years. I tried unplugging it for about an hour and plugging back in, but not working. Will try it overnight and see what happens.... *sigh*

Posted on Nov 15, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

JADEHE'S Solution #2 was the correct fix...I would caution though that if you have limited mechanical abilities approach this with caution. There are many electrical transisters/diodes items exposed when you open the back covers of the TV so becareful not to damage them, but yes this was the fix. My thought is that this unit is very sensitive to power surges/lightning storms and these switches kick off ifon is sensed. Maybe a surge supressor at the outlet may prevent it from happening again, but those are just my thoughts based only my experience with electronics (which aint much)
Unfortunetly, I had already spent the $50.00 diagnostic fee at the TV Repair Shop and was told it was going to need new lamp power supply and that exceeded the cost of the unit itself. Beware of those type of diagnostic responses and above all have them put in writting what they found wrong and the part#'s required to fix it. You may find out that they are not exactly quick to offer that information but remember that is what you paid for. Hope this helped and we owe Jadehe a thank you as well for his post.

Posted on Aug 04, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Where the heck do you get a z6 zener diode? LMELOGRA@OPTONLINE.NET

Stupid morons make this jnk in China..JUNK!

Posted on Oct 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Found Z6 zener diode shorted in power supply. It's a 6.2 volt zener.
Hope this helps

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to do an update on memorex lcd mlt 3222


If you mean a firmware update to the MLTD3222, there is no way for a user to update this TV with built-in DVD player. The manufacturer doesn't provide updates and has no way to access them from a DVD, USB flash drive or SD card. (The manual for the related MLTD2622 is available from Memorex support: http://support.memorex.com/app/answers/detail/a_id/939 . )

I wish that I had better news for you.

Cindy Wells

Jul 08, 2014 | Memorex MLT3221 32 in. LCD TV

1 Answer

DOn't have my remote


There is Input or AV Button in LED Panel if yes you can adjust with that button

Jun 04, 2014 | Memorex MLT1921 19 in. LCD TV

1 Answer

Sanyo LCD-32K30TD (Australian model) no picture, audio only.


If it appears that your panel is lighting but you have no picture you have one of two problems. Either your T-con is bad ( most likely ) or your main board is bad.

Mar 18, 2013 | Televison & Video

1 Answer

Need tv codes for a memorex mltd3222 tv/dvd combo for my direct tv remote


The Dish remote like others only has about 50 possible codes in it--these combo units use odd codes so that remote may just not be able to be programmed for this unit---the remote should have a search mode that allows you to try one at a time every possible code it contains.

May 16, 2012 | Televison & Video

1 Answer

How do I turn on the tv without the remote


There are manual control buttons like Power,Menu,Channel up/down,Volume up/down on the right side tv bazel frame tv facing u.If the tv working correctly nothing wrong with it.That all the tv manual control buttons for the tv.Or try website like Remotes.com to buy the tv original remote or a very close compatible one to use.

Aug 26, 2011 | Memorex MLT1912 19 in. LCD TV

1 Answer

Samsung tv (EURO MULTI) sarvice code


Hello
These are the service modes for Samsung. Check it with.
[1]
Turn on the TV on and select the input that you want to adjust.
# Turn the display off
In quick sequence on the remote press:
{MUTE} {1} {8} {2} {POWER} buttons.

# The TV will turn On with the Service Menu displayed.
ADJUSTMENT - TEST PATTERN - SET OPTION BYTE - FACTORY RESET

# Select the function and use the {VOL+} button to enter.
# Save settings and exit by pushing {MUTE} twice then {POWER}.
[2]
With the TV in standby, press the {INFO} {MENU} {MUTE} {POWER} buttons on the remote.
The TV will turn On with the Service Menu displayed.
Press the {POWER} button to exit the Service Menu.
[3]
With the TV in standby, press the
{DISPLAY} {P.STD} {MUTE} {POWER} on the remote.
The TV will turn On with the Service Menu displayed.
Use the {CH+} {CH -} buttons to select items.
Use the {VOL+} {VOL -} buttons to adjust.
Press the {POWER} button to exit the Service Menu

Jun 25, 2011 | Televison & Video

1 Answer

Problem with the Memorex MLT3221 32 in. LCD TV. When i turn on my TV it displays "Memorex" and very quickly, then it goes black. I took the back off and the red light is on on the power board. But, I am...


I would actually not recommend opening the TV since you could get an electrical shock. I can suggest you to unplug the TV for a while (30 minutes) and then just plug it back in and turn it on. If that does not work, my recommendation for you is to take the TV to a local repair shop. It may be a fuse or internal component shorted out, but in this case is better to have a technician check the unit.

Aug 26, 2010 | Memorex MLT3221 32 in. LCD TV

1 Answer

Memorex MVUC821 TV/DVD. Everything works except the TV.


Just bought the Memorex MVUC821 & the DVD Player will not open using the remote or front panel button!!!

Mar 23, 2010 | Memorex MVUC821 Player

1 Answer

TV HAS SOUND NO PICTURE, TURN IT ON AND IT IS DEM THEN GOES BLACK.


I have the same TV and had the same problem. I took it to sears and in one week had it back working. they replaced the power supply main board. the charge was $75.99 for labor and $35.00 for parts.

Feb 12, 2010 | Memorex MLT3221 32 in. LCD TV

Not finding what you are looking for?
Memorex MLT3221 32 in. LCD TV Logo

5,395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72196 Answers

 Grubhead
Grubhead

Level 3 Expert

4804 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Memorex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...