Question about Refrigerators

Open Question

Aftron wine cabinet

Error code e8

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Chigo Wine Fridge Error

I have a Chigo that displays error code E2.1 alternating at times with E8. The unit runs intermittently. My dealer and I agree the control circuit board is faulty and should be changed at a cost of $125. It is likely due to a failure of the control circuit board, but more specifically the circuitry on the control board related to the upper temperature sensor. The connectors for the sensors and the connector between the compressor and the control and relay boards are also flakey, and this could be the cause, but I could not isolate a bad connection, so will change the control board and hope that fixes the problem.

Posted on Mar 05, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

N'finity wine cooler


call the repair man if probably needs recharged with freon

Feb 16, 2015 | allavino MWR-1682-BL-C 170 Bottle...

1 Answer

Error E8 HP Laserjet MP1136


See this... http://h30434.www3.hp.com/t5/Other-Printing-Questions/m1132-hp-printer-gives-me-e8-error-code-is-it-expensive-too/td-p/907661

Jul 04, 2014 | HP Office Equipment & Supplies

1 Answer

E1 error code LFWC38F6LS


Good Morning Chris,

I see that you are receiving an E1 error code on your wine cooler, model# LFWC38F6LS, even though your wine cooler is still working. This could possibly be a false error code, caused by a miscommunication between the different control boards inside your appliance. I suggest resetting it by either unplugging it or cutting the power at the circuit breaker for 2-3 minutes. If when you bring power back to your wine cooler, you are still receiving the E1 error code, I suggest contacting either the manufacturer or your local authorized technician. Hope this is helpful.

-Best Regards-
WP

Mar 18, 2014 | Frigidaire 38-Bottle Two-Temperature Zone...

2 Answers

Hp laserjet 1132 mfp e8 error code, how do i solve this


Hi Abu Bakarr.

The e8 error is refering to problems with the CIS Scanner. I have attached a link to the product service manual. Read page 122 about the e8 error and perform the 4 steps in the manual to fix the problem. If no luck, the CIS Scanner needs to be replaced. Good luck. http://www.feedroller.com/store/Service%20Manual/HP_LJ_M1130_M1210_Manual.pdf

Jan 10, 2014 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Can I install a freestanding wine cooler under my existing cabinet?


I strongly suggest you find somewhere else for it. Freestanding wine coolers are designed to disperse heat from the back. If you put the cooler under a cabinet, the heat cannot escape and will in time overheat the unit.

Jul 31, 2012 | Furniture

1 Answer

Needs simulations steps on how to reset a E8-000 code


Hello sir; This error code have no way to reset, the ptoblem is icu or pcu main board .

Apr 27, 2009 | Sharp AR-C150 Copier

1 Answer

Chigo Wine Fridge Error


I have a Chigo that displays error code E2.1 alternating at times with E8. The unit runs intermittently. My dealer and I agree the control circuit board is faulty and should be changed at a cost of $125. It is likely due to a failure of the control circuit board, but more specifically the circuitry on the control board related to the upper temperature sensor. The connectors for the sensors and the connector between the compressor and the control and relay boards are also flakey, and this could be the cause, but I could not isolate a bad connection, so will change the control board and hope that fixes the problem.

Mar 22, 2008 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...