Question about KitchenAid KGRI801PBS Gas Kitchen Range
The oven works fine but we are unable to turn off the oven. We have to use the cook duration to get the oven to turn off.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Guy, your missing some letters at the end of the model but I compared 4 different gas slide in's starting with KGST307 and the part numbers are bake ignitor 9751123 and broil 9751784. Catriver..post back
Posted on Apr 02, 2007
SOURCE: The Oven light wont turn off!
The button that depresses when the oven door is closed is probably stuck in the (IN) POSITION. spray some WD 40 on the switch if you can find it. It should be somewhere around the door jam..
Posted on May 31, 2009
We have a gas kitchenaid KGST307HBL9 and the touch pad is blank, but we discovered that you can still touch the buttons and it will work. (example touch bake; temperature; start). It will beep when the target temperature is reached.
Just so we don't forget and leave the oven on, we turn the oven light on as our signal. A little work, but not wanting to "fork" out the money at this time to repair.
Also, if you are handy RepairClinic.com has many items and can also answer question. We've used them for several of our appliance repairs.
Posted on Jul 02, 2009
The problem is: the temp seems to be 'stuck' at 260 and will not allow any higher settings.
Calling KitchenAid proved to be unuseful. The manual did not have this item in the troubleshooting pages. Resetting the power does not help.
There is really no problem besides that the temp display setting has been somehow set to be celsius (metric system) rather than farhenheit (english system). Changing this setting somehow can be easily touched off without knowing, thus the "I didn't do anything and yesterday it was working fine..." comment from family members.
Reset the temp display back to farhenheit (F). This is done by opening the oven door, then hold down the 'Broil' button until you hear a beep from the control panel. The same method may be used to change from Farhenheit back to Celsius.
I speculate the inavertent change of the temp setting is done while cleaning the flat control panel. So the best thing to do is to always 'LOCK' the control panel when cleaning the controls. This is done by holding down the keypad "3/lock" for a few seconds until the display shows LOCK.
(The solution was already posted when I arrived at this page. I just organized it a bit by adding some details and a preventative comment. Many thanks to those who posted earlier, solving my issue as well. I hope my writing presents a clearer and quicker read to the next person)
Posted on Aug 28, 2009
Tips for a great answer:
Feb 07, 2015 | KitchenAid Kitchen Ranges
Jan 15, 2011 | KitchenAid KESS908SPS Electric Kitchen...
Jul 31, 2009 | Maytag MER6772 Gemini Electric Kitchen...
Dec 03, 2008 | KitchenAid KGSA906PSS Gas Kitchen Range
Nov 30, 2008 | KitchenAid KERS807SSS Electric Kitchen...
Nov 29, 2008 | KitchenAid KDRP467KSS Dual Fuel (Electric...
Aug 03, 2008 | Electrolux Kitchen Ranges
Feb 29, 2012 | KitchenAid KGRI801PBS Gas Kitchen Range
360 people viewed this question
Usually answered in minutes!