Question about Jensen 143307 Remote Control

1 Answer

Need remote code for programming a bell expressvu receiver

My orginal bell satelite receiver remote doesnt work...have a jensen universial remote but do not have the programme code needed for my bell expressvu receiver.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Here for the Jensen remote just click below;

Here is link to the manual:

http://www.remotecodelist.com/remotes/jensen/JR300C.pdf


Here is some helpful information I found:
Without the code on JER-323:
1.Manually turn on the component you want the remote to control.
2. Press the device button, example:( TV) and the (power button) for 3 seconds until the (on/off button stays lit).
3. Once the (on/off) button is lit, press the (on/off) button until the unit (the TV or unit you are trying to control.) turns off.
4. When the code is located, press the (stop) button at the bottom to save the code.
Here are some codes I found for the Jensen 323:
GE VCR: 2000, 2013, 2021, 2022, 2053, 2087, 2089, 2091, 2115, 2120
Motorola Cable Box: 5000, 5003, 5046, 5047, 5052
Mitsubishi TV 0093, 0150, 0178, 0019
JVC VCR 0067, 0041, 0008
JVC DVD 0558, 0623

Hope it may help you;

Regards,
VOTIT

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I need a satellite Bell express Vue code (3100) I can't use the remote control Dish!!!!


Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.

1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.

Jan 23, 2010 | DISH Network IR Remote Control

1 Answer

Bought a dish identical remote to Bell Expressvu.


You may need to program to your equipment, go to dishnetwork.com/tech and that will show you how to address your remote.

Nov 06, 2009 | DISH Network IR Remote Control

1 Answer

Samsung BP59-00071B remote wont program Sanyo VCR DVD combo


Try 543. thats what I need to record to my Sanyo VCR via Bell ExpressVu satellite receiver.

Nov 11, 2008 | Remote Controls

1 Answer

Jensen JR400 remote codes


My sheet says the code for a Sony TV is:0000

What an interesting number... Hope it works for you. :)

Apr 12, 2008 | Jensen JR400 Remote Control

2 Answers

Replacement remote for bell expressvu


Here is the link to pdf document: http://www.highspeedsat.com/pdf/satellite-tv/expressvu/remote.pdf

Feb 14, 2008 | DISH Network IR Remote Control

1 Answer

Code for satellite bell (expressview)


Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.

1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.

Jan 03, 2008 | Remote Controls

2 Answers

No code for expressvu


If you have tryed the auto searce mode, that means you tryed every code inside the remote, and if it didnt hit, Im sorry to say your out of luck, as this remote, as I understand from the spec sheet, is not a programmable or learning type remote.

Aug 06, 2006 | Jensen JR400 Remote Control

Not finding what you are looking for?
Jensen 143307 Remote Control Logo

5,124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68153 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...