Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

Battery won't charge

I bought a new battery for my vision m and it wont charge it can you help me The battery icon only has a small amber line at the bottom of the battery icon. the bolt does flash. it tries to charge for a while but shuts down I reset it and that did not help.

Can anybody help me??????

Posted by on

  • scrubs10302 Jan 27, 2009

    I try to charge it through a USB port and the blue LED light flashes for a while, then the battery icon with the bolt flashes on the screen as it would if charging but it never goes over the red battery level and eventually it shuts off and goes back to the blue LED light blinking.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its a secret!!!!!!

Posted on Jan 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My zen vision m 30 gig only comes on when plugged into the mains


If the recharageable battery is more than 3 - 4 years old then the battery could be worn out.Rechargeable batteries have a finite number of charge and discharge cycles andwill lose their charge capacity over time, i.e. won't charge to 100% andgradually the charge reduces until the battery won't charge up at all. OR Thebattery shows a 100% charge but when the adapter is disconnected the batterydrops off to zero capacity in a very short time. If the battery drops to anunacceptable charge level then the battery needs to be replaced.

May 01, 2012 | Creative Labs Zen Vision Digital Media...

3 Answers

I have two ipod video's a1099 and a1059, They were dead wont turn on wont charg,, I got two new battery's The a1099 came on with new battery and had about 1/2 a charge, charged it last night just...


Hi, answer a little bitlong, you can use this links to reset the ipod.



reset-ipod.com/reset-ipod-video.htm

or

support.apple.com/kb/ht1339


or
wikihow.com/Reset-an-iPod

or
support.apple.com/kb/ht1320.

Hope it helped. await your comment.

Take care.

Jun 06, 2010 | Audio Players & Recorders

1 Answer

Won't charge at all


You need to use a different charger or just get one that will plug into the computer.

Aug 23, 2009 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

Creative Zen Vision M won't charge it's battery.


check your usb cable...i had the same problem...

I have a usb cable that came with it ( or some other mp3 player i bought), but it is way too short, so i bought a cheap ($1) and longer usb cable. The computer recognizes the mp3 when connected, but it wont charge with the long and cheap cable.

Maybe you also have a long (or short) cheap usb cable...or maybe your usb cable is plain broke...

Feb 11, 2009 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

ZVM won't charge


Usually this problem is due to the firmware. If you upgrade the firmware to version 1.62.02, this problem usually will disappear. The older firmwares have problems in recognizing the battery and allowing the battery to power the unit.

Here is what you'll need to do to save your Zen: you will need a charger for the operation. I recommend buying a brand new charger from the Creative Labs website or a used one here, instead of getting an aftermarket one off Ebay. Aftermarket ones tend to cause problems or fail to work altogether.

Plug in the wall charger and USB cable at the same time. Your Zen should power on when connected the charger. Once it is powered on, connect the USB cable to your computer.

If your Zen does not power on when connected to the charger, your unit is dead and its time to replace it or get the motherboard replaced via one of the Repair services offered on this website.
Download the firmware to your PC, then reboot your PC and connect the Zen via USB cable. Open the firmware icon to begin the download.

95de636.jpg

If the upgrade button on the firmware window is not available, it is also time to replace your motherboard due to corruption of a chip on the board.

Oct 02, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Zen Vision M battery not charging


The problem was partially solved in that I put my old battery back in and at least it charged properly. I did receive a new battery from BatteryMill and I fitted it and left it charging for 5 hours. However, when I unplugged it to see if it had charged at all it did the low battery thing and then when I tried to recharge it the battery fully charged symbol ame up. I suspect that had I left the new battery charging for say 24 hours it might have charged fully. However, I have decided to send my batteries back and get a refund. The problem must be something to do with a battery memory problem.

Jul 31, 2008 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

Zen m wont turn on


Well, it needs to charge via USB on your computer, so plug in your zen into the computer with the creative usb cord, and let it recharge. It may not necessarily turn on if it's really out of battery, but you can tell its charging when the switch you use to turn on and off, and hold, the light is blinking. After sometime, your Zen screen on the upper righthand corner should show a little battery and be blinking green what stage it's at in its charging. When its done charging the battery icon with be fully green, not blinking, and have a little plug icon inside of the battery icon to indicate that it is fully charged--takes a couple of hours to charge.

If that does not work, check your USB cord to make sure it's not damaged in any way. If it is, you may need to purchase a new one for better connection. And if that doesn't work, then you might need to replace the battery altogether, which I'm sure, if you are still in your manufactuer's warranty, they can do for you. After it is replaced, your zen should be good as new and ready to operate.

Hope this helps. Good luck!

Jul 17, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Hello ,i've a problem with creative zen vision:m version 1.40.02


Make sure it is connected to a computer with a working USB 2.0 hub - if it doesn't charge that way, then the hardware is damaged, and the mp3 player will need to be replaced - cut and dry - no ifs, ands, or buts

Jun 22, 2008 | Creative Labs ZEN Vision:M Digital Media...

3 Answers

Lemon?


return it while u have u receipt in sight

Apr 28, 2007 | Creative Labs ZEN Vision:M Digital Media...

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...