Question about Computers & Internet
After following the set up it still says that it cannot connect to the internet.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your router needs to be configured. Call Linksys Technical Support. If they cannot help you try this http://technicalsupport.blog.friendster.com
Posted on Feb 15, 2009
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Mar 07, 2009
you need to update your netcomm so that the modem router can identify your iphone's or mac's firmware.
to do this type in your browser '192.168.1.1' and press 'management>update software'
Posted on Nov 04, 2009
SOURCE: No internet connection
When connecting the devices make sure that you turn on the device in
this manner: modem (wait for the lights to be solid) then router, then
Check if you can get online, if not then follow the steps below:
1. Open a web browser and type this in the address bar: 192.168.1.1
2. Then you will be in the setup page of the router. You need to know what is your connection type obtained from your ISP.
If DHCP, internet connection type should be: Automatic Configuration - DHCP should be selected.
If PPPoE, select PPPoE and type the username and password provided by your ISP.
3. Then save the changes.
Once that the internet connection is working from the PC hardwired connected to the router, then check the wireless settings under the wireless tab. Take note of the SSID, wide channel, and the wireless security and preshared key.
Put those settings on the wireless adapter of the laptop and you should be able to get online.
I hope this works! Good luck!
Posted on Dec 15, 2009
For that change channel type of wireless and enable DHCP on it. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings change channel type to 3 or 6 or 11 then save settings and restart router. . Let me know if you need further assistance. Thanks for using FixYa.
Posted on Oct 30, 2010
Tips for a great answer:
Sep 25, 2014 | NetComm Telstra Bigpond 3g9wb 3g Wireless...
Feb 09, 2014 | NetComm Computers & Internet
Jan 03, 2014 | NetComm Myzone 3g Router 3g24w /w Next...
Aug 02, 2012 | NetComm NB5PLUS4W Wireless Router
Oct 16, 2010 | NetComm NB5PLUS4W Wireless Router
Nov 30, 2009 | NetComm NB5PLUS4W Wireless Router
Nov 23, 2009 | NetComm NB5PLUS4W Wireless Router
Jul 11, 2009 | Sabrent USB 2.0 NT-USB20 Ethernet Adapter
Feb 09, 2009 | NetComm NB5PLUS4W Wireless Router
41 people viewed this question
Usually answered in minutes!