Cebora mig welder manual diagram for a 190c

Cebora mini mig on trigger no wire feed ,power on? - Fixya

www.fixya.com/.../t25810314-cebora_mini_mig_trigger_no_wire_feed
3 hours ago - Question about MIG Welders ... Weld corp mig 100 turn machine on andwire keeps feeding without ... Welder running but wont feed wire etc.

Cebora Aluminum Pulse MIG Welder

• $4,950.00



• or Best Offer

try here: http://www.cebora.com/download_uk.html#manuali_di_istruzioni

No, you will require at least 5000 watts of power for it.

Most gas welders double as gasless welders. Just buy the flux core wire and use it without the gas on.

Contact Cebora or snap-on, simplessssssssssssssss

Does it blow when the trigger is pressed or as soon as the mains power is applied??? If it blows when first turned on it could be the cooling fan or the main transformer or auxillary transformer if it has one. If it blows when triggered it could be the pcb or the wire feed motor ,diode bank or main transformer .

As far as I know, they are made by Cebora which is an Italian company. Try welding-direct.com as well, you should be able to search for parts through them.

Good Luck!

Hobart has a wonderful site. Go to hobartwelders.com click on service/products and then manuals.

Paul