Question about SanDisk Sansa c250 (2 GB) MP3 Player (SDMX7-2048)

3 Answers

PC is not detecting my scansa C250V2. -error- Refresh data base

My scansa C250V2 is not working. -error showing as - Refresh data base. even when I try to coneect to a PC it is not recognizing - Please advice me.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I didnt

Posted on Feb 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the exact same problem, and i found the solution! if everything he didnt said still doesnt work (though id suggest doing all of it to be sure) unplug your Fuze from your computer and go to "settings." then click "system settings" and scroll down to "USB mode." choose either MTP or MSP. your computer should recognize one of these.

Posted on Feb 07, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 758 Answers

What i would recommend you to do is to uninstall the device and reinstall it back...to uninstall it...assuming that you are running windows xp...click on start, right click on my computer and go to properties..you should have your system properties open then click under hardware then device manager...look for the sansa device..it usually located under portable device..if its not showing there i would recommend you to look for under disk drives and see if its there..right click on the device and click on uninstall...after you unintall it unplug your device from the computer....Then follow this link below to download the porting kit...http://www.microsoft.com/downloads/details.aspx?FamilyId=A2E73160-E862-4F19-BB26-C0CAFE798955&displaylang=en .Then check the mode of yuor device to make sure it sunder MTP not msc...To check the mode go under menu, settings and choose usb mode...After you check the mode open up your windows media player click on tools, options and click under privacy...clear the history and caches...after you finish you can plug the device on the back of the computer not the front then windows should recongnize it and it should work properly..if that doesnt solve the problems upgrade your windows media player to 11 even though you have done that already..and try to reconnect your device..make sure you have it connected on the back USB>>>

And if that doesnt work try to obtain the driver for your sandisk device go to http://www.sandisk.com/DriverDownload/index.asp and find the driver for your device..and then connecct the device on the back of your computer...it should work properly..if you are still having any problems..let me know..i would be more than happy to assist you..
Please rate accordingly
Thank you
Computerrep

Posted on Jan 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have sansa sandisk reburb 2GB mp3 player, it shows refresh data base, please tell me about the action, thanks, bharat


That action happens when you add more files in it! At the first time after you have inserted new files, the player will be checking and creating the list of the files it has inside! Depending on how much data you have changed/added, this process can take up to 10 minutes!

Aug 10, 2010 | SanDisk Sansa e200 MP3 Player

1 Answer

C250-Blank Screen,Not detected


Have you tried updating the firmware? I would try this first. You could have corrupt data, ( try on another system) reinstall USB software or upgrade (if used) make sure to completely uninstall first and reboot.

Oct 31, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

2 Answers

Sansa view is no longer recognized when plugged into USB port


Solutions are in order of increasing probability of data loss AND device recovery.
Screen messages are loose approximations

A Soft Reset
1. Hold Power switch up for 5 seconds.
2. Screen displays "Goodbye".
3. Restart

B. Hard Reset
1. Hold Power Switch for 30 seconds
2. Restart

C. Recovery Mode
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold Home button
4. Connect USB cable to device
5. Screen displays "USB" in small type and "16 MB Format" shows up in My Computer
6. Copy firmware files to "16 MB Format" drive letter
7. Disconnect USB cable
8. Screen displays "Firmware update"
9. Restart device

C. Force Format (This one wipes the data partition. Make sure all needed music/pictures/video exist elsewhere)

1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold top/North/up of Scroll Wheel
4. Connect USB cable to device
5. Screen displays "Format and lose data"
6. Press right/East on Scroll Wheel to confirm
7. Screen displays "Formatting"
8. Restart device

D. Manufacturing Mode (included for completeness only)
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold centre of Scroll Wheel button
4. Connect USB cable to device
5. Windows detects a new hardware device
6. ???
7. ???
8. ???

Sep 07, 2009 | SanDisk Sansa View 8GB MP3 Player - Black

1 Answer

My Ipod doesn't show up on Tune Tools


Hi,

Try Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.

Chris (ziraffa)


Jan 11, 2009 | Apple iPod classic MP3 Player

1 Answer

Sansa e200 shows refresh database fail


try putting it in MSC mode and formating it and then putting back on MTP mode. Hope that works

Aug 24, 2008 | SanDisk Sansa e250 MP3 Player

2 Answers

Refresh database error


Used the Firmware Updater to get the latest firmware and this updated my Sansa E260 player which was in Recovery mode. The player then completed the refresh database process. No data was lost. The player is now functiining correctly.]

Thanks

Jul 27, 2008 | SanDisk Sansa e260 MP3 Player

1 Answer

MP3 needs to refresh DataBase?


You have to many songs a sansa e 250 only holds a certain amount of space so your best bet is to buy a memory card or delete songs so you can add new ones.


sincerely,Britani

Apr 19, 2008 | SanDisk Sansa e250 MP3 Player

2 Answers

SanDisk Sansa e250 MP3 Player


First switch your USB control to MSC. Then turn off your mp3 player and activate the hold icon. Then turn it on while holding the record button with hold icon still being activated. then it will go to recovery mode. Now plug your sandisk into the computer and wait until it says RECOVERY COMPLETE...PLEASE DISCONNECT or when it just says for you to disconnect. This worked on my sandisk, and it hopefully work for you.

Jan 13, 2007 | SanDisk Sansa e250 MP3 Player

3 Answers

SanDisk Sansa e250 MP3 Player


ok, mine had the same problem, first go to settings, then USB mode and switch it to MSC, plug it into your computer and it should show up, then format it, this will erase everything but then u can put it back on, after you format it you can switch it back to MTP mode, its alot better, hope i helped

Jan 13, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
SanDisk Sansa  c250 (2 GB) MP3 Player (SDMX7-2048) Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96396 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...