Question about InFocus LP 600 Multimedia Projector

3 Answers

Projector image is too large for screen

Infocus 500/530 mounted about 30 feet from screen, overflows the screen.  Can't move the projector closer.  Is there another way to adjust the image smaller or add a different lens to zoom down?

Posted by on

  • Anonymous Apr 30, 2009

    similar issue, different model projector.



    Dell 4210x projector is permanently fixed but overflows the also permanently fixed screen. i cant "zoom out" any ideas?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a shade bit on the side of screen is there an easy 2 get rid of it

Posted on Nov 05, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Move the pj closer to the screen

Posted on Jun 08, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 167 Answers

Hello,
There are no other lenses for the LP600 :(

Cheers

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dell d630 laptop wont recognize my infocus lp70+ remote control and I can't advance my powerpoint slides with the remote control


Here's what the User's Manual says:


Using the Remote Control

To advance PowerPoint slides with the projector's remote, you

must connect the USB cable on the projector's computer cable to

the computer. See page 8 for more information.

Point the remote control at the projection screen or at the front or

rear of the projector (not at the computer). The range for optimum

operation is about 30 feet. If you point the remote at the

projection screen, the distance to the screen and back to the projector

must be less than or equal to 30 feet. For best results, point

the remote directly at the projector.


If you are displaying presentations in Microsoft® PowerPoint®,

you can use the remote's Previous and Next buttons to navigate

through your presentation while in Slide Show mode.

Jan 26, 2011 | InFocus LP70+ Multimedia Projector

1 Answer

My dell d630 won't recognize the infocus lp70+ remote control and I can't advance my power point slides?


Here's what the User's Manual says:


Using the Remote Control

To advance PowerPoint slides with the projector's remote, you

must connect the USB cable on the projector's computer cable to

the computer. See page 8 for more information.

Point the remote control at the projection screen or at the front or

rear of the projector (not at the computer). The range for optimum

operation is about 30 feet. If you point the remote at the

projection screen, the distance to the screen and back to the projector

must be less than or equal to 30 feet. For best results, point

the remote directly at the projector.


If you are displaying presentations in Microsoft® PowerPoint®,

you can use the remote's Previous and Next buttons to navigate

through your presentation while in Slide Show mode.

Jan 26, 2011 | InFocus LP70+ Multimedia Projector

1 Answer

The Infocus logo image is up-side-down even without connecting to the computer.


Many projectors allow you to vertically flip the image for mounting the projectors upside down. Each projector is different in how to change that setting, so I would look in your owners manual.

Mar 11, 2010 | InFocus IN36 Projector

1 Answer

I have a sony projector ceiling mounted, the image is projected


go into the menu and the image settings. there is a selection for front, rear, ceiling front, and ceiling rear. it might be sent to ceiling rear, so change it to ceiling front.

Dec 15, 2009 | InFocus In2102 Projector

1 Answer

Connected the Sanyo Pro XtraX Projector, but cannot get image to fit screen. Used the zoom button, but that does not bring it far enough down to size. HELP!


Is the projector permanently mounted or can you move the projector closer to fit your screen. This should do the trick, unless I'm missing something.

Sep 23, 2009 | Sanyo PLC XU35 Multimedia Projector

1 Answer

Image is upside down


Hit the menu/select button to bring up the menu either on the projector or on the projector remote then go down until advanced is highlighted then press the menu/select button then move down until Ceiling Project is highlighted and hit the menu/select button again to get the image right side up. If you have the manual for the projector this information can be found on page 34.

Dec 09, 2008 | InFocus LP 530 Multimedia Projector

Not finding what you are looking for?
InFocus LP 600 Multimedia Projector Logo

Related Topics:

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...