Question about Endurance T3 Treadmill

Open Question

Endurance t3 treadmill

Every time I turn it on it says err7. How do I fix it?

Posted by on

1 Suggested Answer

maxtreadmill
  • 832 Answers

SOURCE: How do I fix my Endurance Treadmill TF3i Err7

Unplug unit remove motor shroud check connections on lower board (incline board). I believe their is a 3 amp fuse in circuit check with multi meter to see if open replace fuse power up unit and if it blows the fuse then replace incline motor and if not, then use engine mode press stop then Incline + or - to force incline up to max incline then bring it down to 0 then turn off power then wait 10 seconds then hit power on then if error does not appear then hit start and resume using unit. If the procedure above does not activate unit then replace board.

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Endex dcmd76


This sounds like a Bodysolid brand machine - you can contact the MFG directly at this number

TECHNICAL SUPPORT
Available M-F 9:00am to 5:00pm CST
Toll Free - 800-556-3113
Fax - 708-427-3598

Dec 03, 2013 | Endurance T3 Treadmill

1 Answer

How to test the test the board


very easy test the output voltage board, for input voltage motor, if there are NOT the board is faulty, see the block diagram attached.
God bless you
1_10_2013_2_33_34_am.gif

Jan 10, 2013 | Endurance T3 Treadmill

1 Answer

The motor cant run


Step 1:

see the video and fix it. God bless you


Step 2:

if the problem persist
a)test the input voltage motor, if there ARE voltage the motor need repair, see my personal TIPS for motor help.
b) adjust the output voltage board , for input voltage motor, if there ARE not , the board is faulty, need replace. see the diagram attached.
1_9_2013_10_58_56_pm.jpg1_9_2013_10_59_08_pm.gif

Jan 09, 2013 | Endurance T3 Treadmill

2 Answers

Dcmd67m digital signals to control the board


Hi, on the DCMD67M the motor run for short time (less than 1 sec) and stop and the error led (red) turn on, P1 displayed on the screen. What is the problem. Thanks

Feb 24, 2012 | Endurance T3 Treadmill

1 Answer

I am looking for spare parts or diagrams for control board DCMD67 for Endurance Tradmill runner 5. I am also looking for a new control board DCMD67. Thank you


Go to the 2 next web page:

1) this is free:

http://fitness.manulsonline.com

2) In this you must pay.

www.fitnessrepairparts.com

sincerely. G-d bless you.

E.CUADRA
MANAGUA, NICARAGUA. C.A.

Oct 28, 2011 | Endurance T3 Treadmill

1 Answer

When I turn on the treadmill, I get the "Err 7"


hi,
check the speed sensor near the motor pulley. if the sensor is open this problem can occur.
ok

Feb 06, 2011 | Endurance T3 Treadmill

1 Answer

I am looking for a cirit board for a endex DCMD67 for a bodyfit treadmill.


my DCMD67 circuit board keeps blowing the fuse or tripping fcl in house sw/bd.
Does not want to start, have had motor checked is ok, leads r ok. What to do?

Aug 12, 2010 | Endurance T3 Treadmill

1 Answer

Looking for a replacement endex pwm board


Call Body Solid @ 1-800-633-1227 ext 520 thats Parts and Tech support

May 15, 2010 | Endurance T3 Treadmill

1 Answer

How do I fix my Endurance Treadmill TF3i Err7 problem? I stopped during operation.


Unplug unit remove motor shroud check connections on lower board (incline board). I believe their is a 3 amp fuse in circuit check with multi meter to see if open replace fuse power up unit and if it blows the fuse then replace incline motor and if not, then use engine mode press stop then Incline + or - to force incline up to max incline then bring it down to 0 then turn off power then wait 10 seconds then hit power on then if error does not appear then hit start and resume using unit. If the procedure above does not activate unit then replace board.

Apr 15, 2010 | Endurance T3 Treadmill

1 Answer

I have a Trotter 535 treadmill. I need to turn


visit wefixfitnessequipment.com and I will tell you how to flip the deck, tighten the belt and where to get lube. If you are planning on flipping the deck make sure you lube it with the right kind of lube!

B. Clark
Trotter/Cybex certified technician
15 years exp.

Dec 12, 2009 | Endurance T3 Treadmill

Not finding what you are looking for?
Endurance T3 Treadmill Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Endurance Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

vinayghl

Level 2 Expert

70 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you an Endurance Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...