Question about Sanyo DS19330 19" TV

1 Answer

Sanyo DS19730 TV No Sound

I have a Sanyo DS19730 TV that loses the sound after about 30 seconds to 1 minute of operation. If you remove the video signal you can hear the the static, you just cannot hear the actual audio. Has anyone ran across this before, or does anyone know where I could download the schematics? Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 139 Answers
Re: Sanyo DS19730 TV No Sound

Number 1 If the Sound is Ok,(CLEAR)For 1 min,Then the First thing I would be Checking Is the Audio Output for Ringbreaks around the Conns,If you have Jacks that say audio out on the Back Plug it into to a Input of a Stero and see If that works

Posted on Jul 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why is there no sound when I use nintendo on my Sanyo tv?

Nintendo64 Sound ' Nintendo Tech Forums > ... > Discussions

Jan 30, 2013 - 6 posts - ‎2 authors
I have recently started playing my SNES and 64. I am playing ... However, when trying the 64 I get picture but no sound. I am using an ... I hooked the 64 up to a Sanyo tvusing the adapter and it worked just fine. My Samsung ... Connecting NES & SNES To A Modern Flat Screen TV ...
8 posts
Jul 10, 2014
Nintendo 64 on Samsung Smart TV -... ' Nintendo ...
13 posts
Dec 19, 2012
Wii U not Outputting to TV ' Nintendo Tech Forums
91 posts
Nov 17, 2012
How to connect Wii to Sanyo Tv? ' Nintendo Tech Forums
8 posts
May 29, 2012
More results from

Sanyo HDMI issue - Forums - CNET

Jan 13, 2016 | Sanyo Standard (CRT) Televisions

1 Answer

No Picture, but sound for a minute, then shuts off

I think your Display card not proper work so please contact LG Technician.


Feb 17, 2014 | LG RU-44SZ61D 44" TV

2 Answers

My 27" Sanyo DS27800 when

U using the RCA AV cable Y,R,W plug into those tv video input holes wright?Tries another RCA Y,R,W AV cable,see if it work?U have tools like a soldering iron,a roll of solders,also can u do basic soldering?Tries take some alchahol clean the Yellow input hole and take the tv aparts resolders it connections joints,now the video out it should work again,if not yellow input hole might be shorted require replacing.

Jan 27, 2011 | Sanyo DS27800 27" TV

1 Answer

Loud buzzing sound on Sanyo AVM 1909

I had a problem like that so I disabled the tv's onboard tuner (input source)and now we use the cablebox's video and audio out to the video and video in jacks on the TV this will work as long as you have a cable box or sat reciever for your video and audio source and of course your TV must have video and audio inputs so it will work.

Good luck Rich

Jun 06, 2010 | Sanyo AVM-1909S TV

1 Answer

Philips tv with sound going in and out

Try bypassing the set's speaker by running an external audio amp. I use my bookcase stereo for audio direct from the satellite receiver and turn the volume off on the TV. Sounds better this way! Could be the audio amp in the TV is going bad or the speaker may be bad and the TV's audio amp goes through a shut down cycle.

Feb 10, 2010 | Philips 30PW850H 30" TV

1 Answer

Sanyo DS35520 no video, only sound

Mine did this about 6 months ago took to tv repair. The video board was loose they said they just pushed it back down and mine has worked fine every since.

May 15, 2008 | Sanyo DS35510 35" TV

1 Answer

Picture goes out, sound stays on

I am not familar with that particular set, but this is what I would check (assuming you don't have a surround sound system hooked up to it as it would sound like a tuner problem otherwise). If you have external Audio/Video jacks with cables hooked up to the Direct TV box, move the video cable and see if you lose video when it is jiggled. If so, you either have a bad cable or connection/connector. When you say you have to turn the TV off for about 30 minutes, do you leave the directTV box on? If so, then the problem seems to be with the TV. Otherwise, maybe the direct TV box is at fault -- leave the TV on and turn off the cable box for a half hour and try it again. You have a few possibilities here, good luck.

Jan 20, 2007 | RCA 27R411T 27" TV

1 Answer

Sanyo DS27880 27" TV, Dish signal lost after tv turned off, doesn't return

checks should on your tv tuner it could be bad.IF circuit should also be check and the video section call in the tech to make checks on your tv.and to do repairs on your tv.

Jan 19, 2007 | Sanyo DS27820 27" TV

Not finding what you are looking for?
Sanyo DS19330 19" TV Logo

Related Topics:

905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66578 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides