Need a manual for a strategy spin saw. (model V17279)

http://www.fixya.com/support/t11233607-mastercraft_maximum_spin_saw_kit_manual


At one time, no manuals online.

Hard to find a reference using Google.

Hi Carol.
try this link for the manual.
Manual for strategy spin saw model v17279 Google Search

Go to: http://www.searspartsdirect.com/partsdirect/user-manuals/113221740-Craftsman-Parts-Saw-Parts-manual.

I don't know the make or model of your saw but the blade brake on circular saws is controlled by the power switch. If your saw previously did brake the blade rotation, you need a new switch to make it work again. Also a generic switch will not do, you have to have the brake switch made for your saw or it will do the same thing.

Hi,
I lost a user manual a while ago and managed to find this company, who were really good. They found my manual and emailed it to me in about 3 hours, cost me about £3 which I thought was resonable.
http://findmymanual.com/
Hope this helps.
Jane

Tires need replaced- may have a few other problems. try this
-unplug the saw spin the saw by hand, does track down the middle of both tires? also look at your guides and backup bearings.
I would take off blade-back off all guides and bearings -clean off any build up on tires- replace blade. now spin wheel ( always spin with the blade going down) if its tracking good go ahead and adjust guides and bearings to specs and try again. most likely the back up bearings are out of adjustment. they should not spin unless you are feeding material and it seems like the bottom one may be your problem.
But never the less it sounds like new tires are needed.

The gears are stripped internally in the saw...it will need to be repaired..

heatman101

need manual on strategy spin saw.

I believe I have the manual for the 8031 table saw. Are you still looking? Contact me at [email protected]