Question about Washing Machines

1 Answer

Leaking underneath leaking under washer not coming from hoses

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 8,205 Answers

More than likely it is the pump

Posted on Jan 26, 2009

  • Dan Webster
    Dan Webster Jan 26, 2009

    leaky pump or slow drain

×


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire Washer Model FAHE4044MWO is leaking from the bottom, what should I check first?


Hello Cicl, I appreciate your post!

If you have a water leak from under your Frigidaire washer it could be a possible problem with a faulty water hose, water inlet valve, or drain pump. Either one of those components could be causing a drain within your washer. Since it could be any one of these underlying issues I would suggest seeking assistance from a professional technician to get a proper diagnosis and repair. I hope this is helpful. -Matt

Oct 17, 2014 | Frigidaire Washing Machines

1 Answer

I have a frigidaire atf6000es and while the washer is running water is running out in the floor


Hello Brandy Neal - Often a leak coming from underneath the washer would indicate a leak possibly in the hoses or in the tub. If the hoses are securely tighten then at this point I personally recommend consulting with a certified technician to narrow down the precise issue.

Mar 10, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My Samsung WA5471ABW top- load washer is leaking from underneath. Is there Nything that I can do to self-repair?


You bet there is. But first let's double check some common causes of leaks that may not be located under the machine. Step one is to check the drain hose behind the machine. If a machine gets pushed back too far it can kink or bind that hose and that can cause water to leak from underneath. If that looks okay check that the end of that hose is not inserted into the drain more than about 4 - 5." If it is poked down into the standpipe more than that it can cause a syphoning situation that can also cause leaking underneath. While you are back there check the hoses that lead up to the machine. Make sure the connections are dry. I can't tell you how many under machine leaks i have fixed that originated right there. Just run a finger under each hose connection. If finger gets wet the connection may need tightened ever so slightly with pliers. If all those check out fine let me know. We'll go deeper.

Jan 13, 2013 | Samsung WA5471ABW 27" Top-Load Washer with...

1 Answer

Ultimate care supreme leaks underneath


First check the hoses to the machine. If they leak the water follows the hoses and drips on floor. Also check the hose connection at the washer. They will leak inside. Next it may well be a water pump going out or the plastic hose that is under pressure when operating. The pump is in the middle of machine underneth - Sorry - Good luck

Oct 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Washing machine leaks from underneath after rinse cycle...wash cycle runs fine, but when it drains out after rinse cycle, it leaks from underneath


i would 1st look to make sure the drain hose is not loose or broken. be sure it is staying in the drain pipe in the wall.it could be a cracked housing on your pump. hope this helps

Jul 11, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

My Whirlpool ultimate care is leaking under,I did check the hoses and they are okey. What could be the problem?.


Can you describe where the leak may becoming from? For example, near the front, from under the washer, or near the back.

If you notice a pool of water coming from under the washer near the FRONT, this is commonly caused by a leaking water pump. Since these pumps are sealed units and are considered non-serviceable, it must be replaced. They cannot be resealed or "fixed".

If the leak appears to be leaking from under the washer near the CENTER of the tub, either the tub seal is leaking or the air dome hose may have come loose. If the tub seal is leaking, it also must be replaced. If the air dome hose comes loose, however, the washer will never fill up all the way and will continuously run. This will cause a flood rather than a drip.

If the leak is coming from the REAR of the washer, this can be caused by cracked fill hoses, loose fill hose connections, a leaking drain hose, or a fill valve hose leaking.

Since you said you checked your hoses, I suspect a water pump, or something loose. Can you please confirm your symptoms and let me know?

Apr 24, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Washer is leaking while it is just setting still.


The first thing that I would check, is the hot & cold water hoses, that connect in the back of the washer, to see if they are tight. If they are tight and still leaking from there, then the rubber washer, inside the brass fitting part needs replaced. If that doesn't help, then disconnect the power, and water hoses, then turn the washer over and check the water hose underneath, to see if its leaking. One of these hoses has to be the problem.

Jan 23, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Washer is leaking from underneath....


lean washer back against wall ck pump under front in center for leaks or dark gray area in pump face remove hoses remove clamp top and bottom of pump slide forward off shaft

Jul 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

HELP!! Leaks!! Leaks!!!


the inner tub and outer tub has a seal under the agitator. this must be replaced. use a spanner or a large channel lock plier to remove the nut. seal is underneath it.

Sep 04, 2007 | Frigidaire GLWS1233A Top Load Washer

1 Answer

Washer leaking water from underneath


Your leak could be coming from the rubber door seal. Inspect all the way around the rubber seal paying particular attention to the areas behind the rubber seal where it meets the wash tub. They wear with age and can develop small holes. When they start leaking it appears like water coming from under the machine. I hopes this helps.

May 11, 2007 | Kenmore 44042 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...