Question about Cisco WLS G BROADBAND RTR-54MB PER SEC W/ 4PT SWCH Router

1 Answer

Getting my Gigabyte GN-WBKG to connect to my Router

This particular wireless adapter has been tested to work with another router, so I know it is OK.

The router I have works with a laptop, and an Xbox adapter, so I know it is working.

The problem I have is when I plug it into either my laptop, or a desktop, it will see the netwoork, connect, and then disconnect 3-5 seconds later. It repeats this over and over.

I have all the latest driver updates. I'm using WPA security, and the passphrase has been verified. What do I try next

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Is your lan card supports Giga? If not, this is the cause of disconnection, some routers does not supports older version of hardwares and softwares. If you have latest version of software on the routers, you should also update the driver of your Network Interface Card. Giga does not support a 10/Half-duplex interface, 100/Half-Interface but does support 100/Full-duplex or 100/Auto, you can check if your Network Interface Card is properly configured to these by doing these:

1.) Right click on "My Network Places" desktop icon.
2.) NIC Properties
3.) Configure
4.) Advanced
5.) Media Type/Speed and Duplex

Posted on Feb 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gigabyte b49g wont link with wireless extender


first, Keep in mind that you bring the device into the same room as your wireless router.Use NETGEAR, Linksys Router.
second, Green LED on the extender is showing green to be able to get the optimum performance on your devices.
third, if not get it than just reset to factory defaults
then manually changed the security settings for your router .

Apr 14, 2014 | Gigabyte GN-B49G Router

1 Answer

I cannot open internet explorer


Is your computer connected to the Gigabyte GN-B41G? Is it wired or wireless? Try a Ethernet cable. reboot the Gigabyte device and reboot the computer. More info would be helpful, Your Computer it's OS, wired or wireless.

Dec 22, 2012 | Gigabyte GN-B41G Router

1 Answer

I lost my network security key for Gigabyte GN-B41G wireless router - I need to add another computer to my home network.


Connect with your existing computer (either wired or wireless)

  • click start
  • click run
  • type CMD
  • type ipconfig and press enter
  • note the default gateway address (should be something like 192.168.1.1 for example)
  • etype exit and press enter

  • open a browser
  • enter the gateway address in the address bar i.e. http://192.168.1.1 as per the above example
  • This will take you to the login screen for the router or the setup screen in the router
  • you may need the login details for the router (if you don't have these then try the factory defaults for your router type, which you can get with a quick google search)
  • You can then find or reset the wifi key on the WiFi section of the configuration pages.

(note if you can't get into the router you can do a factory reset, HOWEVER you need to make sure you have all the broadband user account settings to attempt this)

hope this helps

Please take the time to rate this answer.

Many Thanks Don.

Sep 05, 2011 | Gigabyte GN-B41G Router

1 Answer

Unable to connect to internet with Buffalo WCR-GN router. LAN connection is okay.


There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Jan 19, 2011 | Buffalo Technology N-Technology...

1 Answer

I am 300 meter away from my broad band connection i am unable to connect internet.


ok it would seem there isnt a strong enough signal in which case you would need to get closer to your router

Jun 22, 2010 | Gigabyte Wireless VPN Broadband Router...

1 Answer

I don't know if my router has upnp, how can i find out?


First connect your router to computer with ethernet cable.
then access it with following link
http://192.168.1.1
or
http://192.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

then go to advanced -> UPNP check it is neabled or not.?

Let me know if you need more assistanse.
Thanks.

Aug 27, 2009 | Gigabyte GN-B49G-WPEAG Router...

2 Answers

Pleess help me !!!


By default, both the username and password on your router are admin

Apr 13, 2009 | Gigabyte GN-B46B Router

1 Answer

Gigabyte GN-B49G SSID Change


What is your operating system and are you using any special programs for wireless connectivity?

Apr 25, 2008 | Gigabyte GN-B49G-WMAG Router (GNB49GWMAG)

Not finding what you are looking for?
Cisco WLS G BROADBAND RTR-54MB PER SEC W/ 4PT SWCH Router Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

brian soufane

Level 3 Expert

693 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...