Question about HP Office Equipment & Supplies
When I attempt to print, the printer begins gearing up (responds to request from computer) then says "out of paper" although it has plenty of paper. I have reset the printer, removed the paper, re-stacked it and returned it to the tray with no success. I also opened all of the doors to check for jams, etc... and there are none.
Try to do the following reset on the machine: disconnect the power cable from thr back of the all in one, than press and hold the button ok and help together while reconnecting the power cable. Release the buttons when machine shuts down automatically. Reboot the machine. Reset is done.
Posted on Jan 26, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 16, 2017 | HP OfficeJet Office Equipment & Supplies
Aug 23, 2008 | HP Office Equipment & Supplies
Mar 08, 2014 | HEWLETT-PACKARD photosmart C5250...
Feb 08, 2011 | HP P4515n LaserJet Printer
Selecting which tray is used for printing
You can select how the printer pulls paper from the trays.
Understanding tray order
When the printer receives a print job, it selects the tray by trying to match the requested paper
type and size with what has been loaded in the trays. Using an "autoselect" process, it searches
all available trays for the paper that satisfies the request, starting with the bottom tray and ending
with the top tray (tray 1). The printer begins printing the job as soon as it finds the proper type/
Note The "autoselect" process occurs only if no specific tray is requested for the job. If a specific tray
is requested, the job prints from the requested tray.
If paper is loaded in tray 1 and tray 1 is set TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY on the
Paper Handling menu, the printer will always pull paper from tray 1 first. See "Customizing
tray 1 operation" on page 47 for more information.
If the search fails, a message appears on the printer control panel display requesting that
you load the correct paper type/size. You can load that paper type/size, or you can override
the request by selecting a different type/size at the printer control panel.
If a tray runs out of paper during a print job, the printer automatically switches to any tray that
contains the same paper type/size.
The autoselect process changes somewhat if you customize tray 1 operation (as explained in
"Customizing tray 1 operation" on page 47) or set tray 1 for manual feed (as explained in
"Manually feeding paper from tray 1" on page 49). See if this works. Good luck !
Jan 08, 2011 | Computers & Internet
Nov 16, 2010 | HP LaserJet 4700N Printer
Feb 07, 2010 | HP Office Equipment & Supplies
Dec 09, 2009 | HP LaserJet 4200 Printer
Mar 28, 2008 | HP Photosmart 7450 InkJet Printer
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: