Question about Food Mixers
Interference Suppression Capacitor
Posted on Jan 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The 0.1 microfarad can be safely replaced with a 275 VAC 0.1mF mains capacitor. You can remove the clip that held the old electrolytic capacitor by sliding the old capacitor out and squeeezing the metal clip so that it disengages with the plastic base. The load resistor is 450 Ohm 15W or 20W wirewound. There is a 56 ohm resistor in series with the capacitor which helps smooth the speed change and reduces wear on the contacts. A 2W wirewound resistor works best. (It is worth removing the contacts and removing any pitting or carbon build up with fime emery paper). I have repaired about 20 speed controls sucessfully with these components.
Posted on Dec 27, 2008
could be one of three things
1) the belt is broken to the main gearbox (fairly easy to replace if you can get one)
2) a gear has slipped or broken which means none of the front end will operate.(I have this problem and cannot get the gear body to open)
3) If the top and front worms are turning then the problem is with the planetary gear which again is fairly easy to replace
Posted on Apr 30, 2009
Tips for a great answer:
Feb 10, 2013 | Food Mixers
Nov 08, 2011 | Kenwood KM400 / KM410 Chef Classic Stand...
Dec 03, 2008 | Kenwood KM800 Major Classic Stand Mixer
Sep 10, 2008 | Kenwood KM800 Major Classic Stand Mixer
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: