Question about Kenwood Excelon DDX-7015 Car DVD Player

1 Answer

Kenwood sterio wont turn on

I left my truck with my dad for awhile my battery died i changed it out and in order to get the sterio to work u have to have the code. Well he didnt know it, im not sure how many times he tried entering one in, is it possible that if you enter the wrong code to many times you can get locked out of your sterio. The reason i ask is because im home now and when i went to turn my sterio on it doesnt turn on and im not sure why

Posted by on

  • Anonymous Feb 05, 2009

    I bought a car with a kenwood stereo already in it, How do I get a copy of the manuel that was to come with it and the codes?? Do not know past owner who installed



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

The short answer is yes... it's a theft prevention thing... try unhooking the battery again for a few minutes... the hooking it back up... i presume you have the code and know how to enter it ?


Please take a moment to rate this solution

Posted on Jan 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

New battery In mercedes no power

I'm not a car mechanic, but, it sounds like you might want to check the fuse to the ignition switch, and, if that fails, it might be a problem with the Start Safety Switch on the transmission. Good luck.

May 02, 2017 | Mercedes-Benz S-Class Cars & Trucks

1 Answer

I have a 06 poniac torrent with left side signal trouble. Im the mornings and off and on thru the day the left signal light on the dash stays on. Signal wont work on the car, then when light in dash is...

You have a Burned Out Bulb on the LEFT side or the FLASHER has gone bad *(YES, it can only effect one side). It also controls the BLINKERS and FLASHERS TOO

Apr 09, 2013 | Cars & Trucks

1 Answer

Battery died, Now subwoofer and Amp dont work

on some sterio head units when they lose power u have go into the menw setup and turn the sub controls and adj. back on. this may help if u have not did it all ready /

Mar 15, 2009 | Car Audio & Video

1 Answer

Car wont start

Make sure that the Battery Terminals are Clean and free of Corosion. Then Put the Cables back on a Little Bit Tighter.

Jan 18, 2009 | 1997 Oldsmobile Eighty Eight

1 Answer

The battery in my car died and when I jumped it and got it started again, the sterio was asking for a password. It's a used car...I have no idea what the password is. Anyone know of a default code or...

say if your car was a Holden, ring up Holden and just tell them you put a new battery in and your radio is asking for a pass word and they will give it to you..

hope trhis helps

Aug 22, 2008 | Kenwood Audio Players & Recorders

1 Answer

Kenwood VR-357

well run your dvd player to tv ok sound and video then run cable to tv same way then use master rca left right outs from tv back to the sterio ch in video 1 ok then turn on sterio to video one ch and u got it

Jan 28, 2008 | Kenwood VR-357

1 Answer

No receiver audio out

cheak displeys wires pluged in tight does sterio get hot then u see it go off

Jan 23, 2008 | Kenwood VR-2090 Receiver

1 Answer

Kenwood amp

how big the amp dont forget those thing take lots of juice you need a big wire front battery to amp when the engine running it should be 13.8 to 14.5 volt if anything less than that battery wont get the charge up and check for good ground cheers and dont forget to rate this p.s any other question about our charging system or anything else dont hesitate im ear

Jan 18, 2008 | Kenwood KAC-9102D Car Audio Amplifier

Not finding what you are looking for?
Kenwood Excelon DDX-7015 Car DVD Player Logo

Related Topics:

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4905 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides