Question about Dayton Electric Heater
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You should be able to google the manufacture and look for a contact us area where you can get a hold of them and order it unless the part is obsolete. They could have a universal replacement.
Posted on Feb 16, 2009
Pilot lighted furnaces have a thermocouple made from disasimilar metals that when heated create electricity to actuate a relay that alows the gas to flow to the furnace.
When the thermocouple gets coated with carbon from the pilot lights constant burning it acts as an insulator and keeps the thermocouple from getting enough heat to generate electricity, a very good safety factor.
What you have to do is locate the thermocouple it should be located over the pilot light, you will see a gray substance around the thermocouple it will be hard like cement, take a knife and scrape away as much of the gray material as possible then sand the themocouple with a medium sandpaper until it shines, use one of you wifes emery boards, this should solve your problem.
Posted on Feb 24, 2009
SOURCE: dayton kero heater wont fire0
OHH I bet this is the same question I just posted to. So it is a forced air kerosene. The usual is like I said a blocked combustion air hole. It could also be something shorting out the spark ignition to ground when replaces inspect the wires and look for a week or loose ground in this case. Sorry about the confusion.
A Bad ignition proving circuit or something like (what we call here dirt dobbers) hornets nest could be letting the flame hit it and not allowing full flow through the heater. Mice are also notorious for making problems like wires chewed and nests in the wrong place. Given where it may have been stored.
Posted on Mar 04, 2009
consult with WW GRANGER. They have Dayton as a line and will be able to tell you whats available from model number. They also have a web site with phone number to their stores. try it w dot com.
Posted on Mar 04, 2009
Tips for a great answer:
Jan 23, 2016 | Dayton Dryers
Jan 09, 2016 | Dayton Electric Heater
Dec 21, 2015 | Dayton Heating & Cooling
Jan 27, 2011 | Dayton Electric Heater
Dec 28, 2010 | Dayton Gas Furnace Heater
Dec 10, 2010 | Dayton Heating & Cooling
Jan 07, 2010 | Dayton Electric Heater
Dec 16, 2009 | Dayton Electric Heater
Feb 14, 2009 | Dayton Electric Heater
Jan 10, 2009 | Dayton Electric Heater
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: