Question about Fisher Paykel Fisher & Paykel AquaSmart WL42T26DW1 25" Top-Load Washer with 3.1 cu. ft. Capacity, 7 Wash Cycles, Load Sensing, Dual Washing Modes, 3 Dispensers, Auto-lint Disposal, Smart Drive System and LED Control Panel

1 Answer

Fisher and paykel aquasmart fault 235

After my machine starts up it sounds like the water is trying to pump through but doesnt go any further this happens for about 2 minutes before fault 235 comes up on my screen. This is the 2nd time this machine has needed fixing and quite frankly I'm over it. I've spent more money on repairs then the machine is worth.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher Paykel Master
  • 17,130 Answers

Try cleaning the INLET and the outlet valves, it is possible that the filters are blocked. If not check the wiring harness from the panel, check for moisture within the panel, if so use a dryer to warm off and test. Please estimate before any parts are replaced.

Posted on Jan 21, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fault 49


The main board is displaying the wrong error
for the problem your machine has.
Fault 49 is water valves error.
The most common problem with AquaSmart is pump faulty
and damaged your motor control board,
Pump and motor control board need replacing.

Jul 31, 2014 | Fisher and Paykel Washing Machines

1 Answer

Fisher and Paykel Aquasmart


250. (11111010) SmartPump Loss Of Sync
This fault is normally as a result of the pump not starting. This fault is usually caused by an
object that has gotten into the pump, and is either under or on top of the impeller, which is
causing the motor to stall when it is trying to start.
Primary Source: Pump Stator Windings Open Circuit.
Action: Measure the resistances of the pump stator. For more information
refer to the AquaSmart service manual.
Secondary Source: Pump System.
Action: Follow procedures as for Fault Code 249.
Tertiary Source: Motor Control Module.
Action: Replace Motor Control Module.
5b5b1388-4a3c-4352-9374-73a2b30cc000.jpg

Apr 27, 2013 | Fisher and Paykel WA37T26G Top Load Washer

1 Answer

Fisher paykel aquasmart fault 49


Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse, A common thing in Aqua-Smart Machines.
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.

Apr 20, 2013 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Fisher paykel aqua smart fault 49


Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse, A common thing in Aqua-Smart Machines.
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.

Apr 20, 2013 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Fisher & Paykel Aquasmart WL80T65C 5 years old with fault 245, then 49.


Error code 245 is pump stall.
If the 1.6amp glass fuse has blown, the five mosfets on right side have shorted out there legs & blown the fuse.
Also check the pump drive parts for shorted legs.
There are three resistor that burn out near the fuse.
I will up loaded some pictures later.

2_9_2013_9_26_34_am.jpg


2_9_2013_9_26_58_am.jpg

Feb 08, 2013 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

TO FIX CODE 49 AQUASMART WASHINGMACHINE FISHERNPAYKEL


Yes you are right the pump in AquaSmart machines blows the water valves fuse that give you fault code 49.

Mar 18, 2012 | Fisher and Paykel Washing Machines

1 Answer

My aquasmart fisher and paykel washing machine flashes up with error 235 about 2 mins after starting


Sounds like the 'lid lock' has shorted out. They're not completely waterproof and have seen pins completely blown out inside them. Should measure 73 ohms (or very close to it) across the terminals. Hope this helps.

Jan 16, 2011 | Fisher and Paykel WL26CW1 Top Load Washer

2 Answers

Fisher@paykel aquasmart WL80T65CW1 fault code245 and code49


hi my fisher & paykel aquasmart has a message saying fault 49 what does this mean?

Sep 03, 2008 | Washing Machines

Not finding what you are looking for?
Fisher Paykel Fisher & Paykel AquaSmart WL42T26DW1 25" Top-Load Washer with 3.1 cu. ft. Capacity, 7 Wash Cycles, Load Sensing, Dual Washing Modes, 3 Dispensers, Auto-lint Disposal, Smart Drive System and LED Control Panel Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Paykel Washing Machines Experts

marlin siecinski

Level 2 Expert

512 Answers

Greg Stephen
Greg Stephen

Level 2 Expert

554 Answers

Paul P

Level 2 Expert

66 Answers

Are you a Fisher Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...