Question about Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Calibrating 5100 kodak all in one easy share printer

I can't get a calibration sheet to print when I change the ink

Posted by on

  • 2 more comments 
  • Anonymous Mar 04, 2009

    where is the printer maintenance programme

  • Anonymous Apr 14, 2009

    how do you calibrate the 5300 Ai1

  • Anonymous Apr 15, 2009

    that doesn't make it print a calibration page

  • Anonymous Mar 13, 2014

    The printer will begin to print a document, but then the words will fade out after the fifth or sixth line. I tried calibration and cleaning the print head, but neither caused any changes. The ink is new and it is hooked up correctly.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

Go to the printer maintenance program and select "Calibrate printer".

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed new ink calibrated prints like they are negatives


First Check For Setting in the software and if problem persist the change cartridge.

Jan 01, 2013 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

I have changed the cartridges in my printer nd it


This is an issue with the printhead of the printer. Please follow the below mentioned steps:
  1. Reseat the ink cartridges and the printhead of the printer. If you need help in doing so please go to the link http://faqs.kodak.com/atg/faq/attachments/AUR1780-2.pdf
  2. After you are through with reseating the ink and the printhead, the printer would ask you to go through a calibration and the light on the printer would begin to flash.
  3. To calibrate the printer, put paper in the paper tray and press Start button on the printer. After you have printed the calibration, you will have to scan it so place it on the scanner glass and hit the start button.
  4. After calibrating the printer, try a deep clean by pressing the Cancel and Copy buttons at the same time for two seconds. Wait for a minute and the cleaning process would complete.
  5. Try printing a Demo sheet by pressing Copy and Cancel button.

If the problem still persists, you can get a free printhead replacement from Kodak.

Oct 06, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Blank page


sounds like dried cartridge

Mar 29, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Printer will not print black ink


Seems to be a common fault with Kodak EasyShare 5100/5300

Contact Kodak Support and go though the following tests:

Remove and re-seat Printer Cartridge(s) - Done

Clean Printhead - Done

Calibrate Printer - Test Sheet Not Complete!

Run Computer Colour Test - Done

They will then send you a new Print Head.

Mar 25, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Why will my new printer not read the ink level?


it is because the ink status monitor is not enabled in ur moms printer properties.enable it and u will be able to see the ink levels.

Dec 28, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Printer easy share 5300


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 01, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Print quality


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Jul 18, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Kodak EASYSHARE 5100 All-In-One Printer Logo

957 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...