Question about Hoover MaxExtract Deep Cleaner

1 Answer

Wont pickup water

No suction max extract deep cleaner

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 91 Answers

Check dirty water tank make sure lid is on correctly and that the plunger is not stuck.

Posted on Feb 13, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 240 Answers

SOURCE: i cant get the brushes

Remove the brush assembly and insert a flat screwdriver into the square hole and be sure it turns. If it is seized up, the turbine assembly will require replacement. If it turns, be sure the brush control is set to the brush position and the filter is clean. The filter may be on top behind a clear plastic cap, or underneath in red plastic holder depending on the model. The brush will also not turn unless the lower tank is in place, and the handle released and tilted back.

Posted on Jan 28, 2011

galati2k
  • 281 Answers

SOURCE: hoover steam cleaner wont pickup water

in the front on top the cover that curves down to the floor is where the suction is .it should be plastic you can see into.its probably clogged with hair and dirt.you need tro take that top off and it comes apart in two sections .the middle seperates from the outer part.once apart you can clean it with soap and water.after you get that off you will see on your left side a long square port that needs to be cleaned also.please leave feedback.i hope i was of some help to.pete

Posted on Apr 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover steam vac deep cleaner not ucking up


Hi! If your cleaner is not picking up this could mean that something is not sealed off properly. Try these brief trouble-shooting steps to restore suction to your SteamVac.


1. Remove the clean water tank.

2. Recline the handle and let the cleaner lay flat.

3. Remove the dirty water tank lid.

4. Reposition the front panel located on the outside of the tank in the center. It should be flush to the tank, even straight across and pushed down as far as it will go.

5. Assemble the dirty water tank lid back on from the front to the back. The lid should not lift up from the front.
Give it a try! The suction should be restored. Hope this helps!

Aug 26, 2014 | Hoover Vacuums

1 Answer

My hoover max extract dual v stopped sucking up the water on just its second use. Any ideas on how to fix this problem?


The most likely problem is there is a restriction somewhere or a suction leak. Check to make sure you have good suction where the waste water tank fits down onto the machine. Make sure the lid is on the waste water tank and follow the flow of suction from the machine through the waste tank down to the floor and look for debris clogs or any area where there may be a suction leak. If you have good suction coming from the machine the problem has to be somewhere between there and where the water is being sucked off of the floor.

Oct 24, 2013 | Hoover MaxExtract Dual V Carpet Cleaner...

1 Answer

Won't pickup water on rug


I may have already given my best advice but, check the hose line to the extraction tank and make sure there are no cracks in it. This will allow it to **** in air, and therefore reduce the vacuum pressure at the head of the machine, causing it to malfunction.

Oct 06, 2012 | Bissell ProHeat Turbo Deep Cleaner Upright...

1 Answer

Bissell pro heat will not extract water from the carpet


Try checking the top section of the machine (where the dial is located to switch it from floor to tool) and there is a little red plastic piece about 1 inch square on the inside of it. This is a lint filter that has a little door on it. Open the door or remove the entire thing to clean it out. It is probably completely blocked with hair, etc.. which is why you have no suction. Replace it after you clean it out and hopefully your problem will be solved!

Sep 06, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

My bissell proheat 2x wont vacuum up water


There is a float (usually looks like a red ball) that rises up if water is in danger of getting to the motor. Sometimes they stick.. Give it a poke to free it up.

All the best,

WD

Aug 18, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Water comes out when trigger is squeeze but wont **** up dirty water


A. Is your floor/hose knob in the correct position?
B. Do you have suction at the hose end, when in that position?
C. If you answered yes, no in that order then either your motor (provides the suction) is going bad, or it simply is clogged and needs to be serviced.

Apr 15, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

MY BISSELL PROHEAT WONT SUCTION


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
ffuutr

Jan 28, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

It wont extract water


Something is probably clogging up the suction.
Try to snake it out with a coat hanger or similar tool.
Often, especially with shedding pets hair will clog the suction pipes.
Hope this is helpful.

Good Luck!

Jan 04, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

Not finding what you are looking for?
Hoover MaxExtract Deep Cleaner Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...