Question about Pride Health & Beauty

1 Answer

Pride colt . fully charged batteries but no power to lights indicators or drive

Not switched to free wheel the only thing I get is very low power to horn. this is only just over a year old. does anyone have any ideas

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pride Master
  • 1,263 Answers

Hi, okay have you checked the fuses located on the tiller stem normally located under a black plastic cover ?

Your batteries may be fully charged but the voltage is not enough to power up the controller, sigh of a dodgy charger ? , bad batteries ? ? check the battery voltage , should be at least 24volts
The horn will work as it bypasses the controller logic.

Regards

Posted on Jan 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
gewiz
  • 1263 Answers

SOURCE: batteries are fully charged but won't go forward

it should show 24v not 13,5volts, sounds like you only measuring one battery,

Check the fuse under the seat and check the reset button,

Could be a bad connection to the batteries or to motor check the B+, B- voltages, should show around 24v.

Regards
GeWiz.

Posted on Oct 07, 2009

  • 175 Answers

SOURCE: I have a pride victory xl8. Problem - was running

All scooters have a protection system built in to prevent burning up the motor, and the user, should the scooter overheat. It sounds like yours overheated. If the temp. outside was warm to hot, and your weight is near the weight limit for the scooter, and you are taxing the motors over a hill, or unstable terrain, then the scooter goes into "limp home mode", or just enough to get you a bit aways, and then it will turn off. After a few minutes to cool off, it will go again, but shut down fairly quickly because it takes a spell to let the whole transaxle-motor assembly to get cool.

Check your weight, and anything else you may be carrying with you on the scooter. Check the terrain, and incline you are going against. Throttle down for all these occassions. If you overloaded the system at some point, then you may have overheated the brushes. Remove them (2) with a standard screwdriver and see if the copper coil is still flexible and springy. If not, replace it/them.

The damage may already be done, so it may need a new motor/transaxle assembly. An expensive proposition I'm afraid.

Posted on Jul 09, 2009

  • 692 Answers

SOURCE: I have brand new just

David, If you are not getting the yellow light on the charger then you have a problem with the charger. What voltage are you getting at the batteries when charging? You can check the charger by removing the end plate where the lights are to see if there is a fuse on the output side of the charger. if there is check to see if the fuse is blown. There probably is a fuse on the other end but since the red light comes on it is good. If you plug the charger into the charger port and put your ear to it you should hear a hum coming from the charger. Hope this helps you

Posted on Sep 29, 2010

HoverTech
  • 232 Answers

SOURCE: battery fully charged,horn works but

Make sure your freewheel brake is in the DRIVE position. Check your owner's manual for the location of the free wheel lever, ususally it is near the rear of the scooter. If the chair is in DRIVE mode but the wheels will not turn, you may have a motor problem which would require replacing the motors.

Posted on Oct 11, 2010

  • 692 Answers

SOURCE: I have a 3yr old

Kay the status light flashing indicates a problem. Count the nunber of flashes and your manual should tell you what the error code means. Also check the freewheel lever and make sure it is drive position. Without knowing the number of flashes I can't tell you what the problem might be. Hope this helps

Posted on Mar 21, 2011

Testimonial: "freewheel lever! thank you very much"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Victory pride 2002 won't work?


hi Wendy it sounds like the batteries are so low that they can't even power the horn ?
check the batteries connection and the reset fuse situated at the rear .

regards
Rob

www.gewizrepairs.co.uk

Feb 18, 2017 | Pride Health & Beauty

1 Answer

Pride colt plus mobility scooter light flashes 7 times battery fully charged frewheel lever in correct position and there is an audible continueous horn type noise but the scooter will not move


hi , 7 flashes mean the there is a issue with wigwag also known as the throttle lever now can you confirm the year of the colt please ?

Regards
Rob

Feb 08, 2016 | Pride Health & Beauty

1 Answer

Green ready light on Pride Sonic three wheel scooter wont turn on. What turns it on?


Hi if it is similar to pride x the circuit will shut down if key is left on for 20 minutes u will still have lights. Remove key for a short time then replace it & turn on ..goood luck

Jan 21, 2016 | Pride Sonic 3 Wheel Portable Scooter

1 Answer

The battery is fully charged, all the relevant lights are on but the battery sign that doesn't usually come on is now showing a blue light. What does this mean?


Are you positively sure that the batteries are good????? Bad batteries can give a high voltage indication but yet have no current which is what powers the device.

Batteries do wear out and this includes rechargables.

Nov 06, 2015 | Pride Mobility Products Go-Go Elite...

1 Answer

Low battery indicator


look for corrosion on the battery terminals. Make sure they are clean and tight. The charger cannot overcome severely discharged batteries. Seperate the two batteries and use a 12 automotive battery charger to bring up the charge. Then reconnect the batteries and use the 24 volt charger to top off the charge.

Feb 14, 2014 | Pride Health & Beauty

1 Answer

One wheel on my Pride Jet 3 won't go.


Have you ever solved the problem? My Jet 3 does the same thing and i would like to know whats causing it.

Thanks
Rangr90

Jan 08, 2012 | Pride Used Mobility Jet 3 Power Wheel...

1 Answer

Forward/Reverse switch not working Revo Pride


Could it be in free-wheel mode. Most Prides have a pull up knob at the rear of the scooter.

Jun 03, 2009 | Pride Value Line Revo Scooter 3 Wheel

1 Answer

Led lights flash and Pride Go chair won't move.


Firstly disengage the drive levers and then "flick "them in fash.
Second pull out the large plug that is between them.
Check for damaged or bent or loose pins. press it home firmly .
I did this on my wifes chair and she zooms around.
All switched etc should be off during charge.

Lastly i fully discharged then recharged the battery to ensure no "battery charge memory".
To fully dicharge i shoved a small box between back wheels so to lift of ground and then a elastic band to hond controler on.

Jan 11, 2009 | Pride Go Chair Travel Power Chair

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...