Factory reset mfc 7360n - Brother Multi-Function Center MFC-240C All-In-One InkJet Printer

you do not repair them-- just replace
you can reset the error code if needed

Faulty Drum

Most probabply will also say Please put paper in the MP tray ?

If you are using refilled products then your re-manufacturer needs to reset the cartridge. For these there is a particular gear placement to allow the toner sensor to reset. If you are using Brother Original products then the brother helpdesk should talk you through this.
If you are filling your own cartridges well any issues you have with this reset process are at your own risk.
Once you have completed the reset process go to the brother website and download the latest firmware update for your machine as this will alleviate most of the issues with cartridges not being correctly set.

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-style-parent:""; font-:10.0pt;"Times New Roman";}

1. Open Front Cover.
2. Display reads "Front Cover Open"
3. Press the 'Clear' button
4. Display reads "Replace Drum"
5. DO NOT RESPOND TO THIS MESSAGE. Press '*, 0, 0' on the keypad.
6. Press 'OK'
7. Close Front Cover.

your machine should now be ready to print.

Leave the machine and attend to it at a later time repeating all you initially did.

Different paper path, the MultiFunction unit is dirty - Most likely toner inside the roller or paper path. Try a laser cleaning cloth that you can buy in some stores or online. Search: Staples


If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73

Hi, cleaned the narrow part on the glass platen.

open front cover, hit clean or pause; it will display: REPLACED DRUM; choose yes and hit ok.

Problem with your Patch Cable - Router or Switch. Last case...faulty Main PCB

how is brother 7360 toner reset ?