Question about E-Machines T Computers & Internet

1 Answer

Want to restore to beging of time

Want to clear computer restore to factory settings

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • E-Machines Master
  • 27,725 Answers

Remove any DVDs or CDs from the optical drives and then unplug all peripheral devices except for the keyboard and mouse. Click the "Windows" button and then type "eMachines recovery management" into the search box. Click on "eMachines recovery management" in the results list and then click the "Restore" tab. Click "Password Settings" and then type a new password into the text box. Click "OK" and then click "Restore System to Factory Default". Type the recovery password into the "Password" text box and then click "OK". Click "Next" To start the recovery process. Click "Finish" and then wait for your computer to restart. This procedure could take several minutes. Once your computer has restarted, you'll be prompted to create a new user account, enter the date and time and set up the internet settings.
or if you are running XP If you set your machine back to eMachines factory settings, it might help you for a short while but if you don't have effective virus protection your problems will return in short order.

You should get rid of this virus with an effective virus remover.

You can run Bitdefender's free online scan which doesn't need to be downloaded http://www.bitdefender.com/scan8/ie.html

If you know when you got the virus, you can do a system restore to a time before the virus was on your system.
This article tells you how to run it from safe mode http://bertk.mvps.org/html/safemode.html

Your best protection in general is a complete internet security suite such as Bitdefender or Norton internet security 2009.

More information here http://www.ask-the-computer-doc.com/comp...

If you need to totally rebuild your system and you don't have a recovery disk, contact eMachines to get one.

You might also try a Windows repair install if you have the operating system disk. Follow the directions here for XP http://www.michaelstevenstech.com/XPrepa... Source(s): http://www.ask-the-computer-doc.com/comp... Hope this helps.

Posted on Jan 20, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emo_bunny
  • 5 Answers

SOURCE: restore factory settings

Try this like http://support.microsoft.com/default.aspx/kb/933168
for your problems

Posted on Dec 17, 2007

s4u311
  • 813 Answers

SOURCE: i want to restore my

hi friend

u have to do this clear your bios password u have remove your pc bios battery for few mintes then u have to put it back your bios password has been clear

thnx for using fixya

Posted on Jul 08, 2008

  • 164 Answers

SOURCE: i want to set my computer back to factory defauts.

no,if you mean with all the bells and whistles it had off th shelf. Of course reinstalling the operating system would get it back to a "clean" state
www.aa1consulting.com

Posted on Jul 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to factory reset a eee pc 1000HA


One way to clear an Asus PC of problems or viruses is to restore it to its original factory settings. This will wipe the computer clean and give you a fresh start. The idea of restoring your laptop may be intimidating, but there is no programming involved. In fact, these laptops are designed to be restored in a short period of time.

Step Turn off the Eee PC. Press the power button or select the shut down option from the computer's main desktop screen.
Step Turn the unit on and press the "F9" when the flash (logo) screen appears. A menu will appear with a list of options to choose from.
Step Select the "Restore Factory Settings" option from the bottom of the list in the menu and type "Yes" when prompted to verify the reset.
Step Press "Enter" when prompted by the computer to reboot the system. Wait a few seconds for the system to reboot.
Step Follow the prompts on screen to accept the licensing agreement and configure your settings.

Apr 24, 2017 | ASUS Computers & Internet

1 Answer

What is a 116-386 error code


Resetting to Factory Defaults / Clearing the Memory

You can selectively clear information stored in your machine's memory.
  1. Press Menu on the control panel until Maintenance appears on the top line of the display.
  2. Press the scroll buttons until you see Clear Memory on the the bottom line and pressEnter.
  3. The first available menu item, Paper Setting, displays on the bottom line.
  4. Press the scroll buttons until you see the item you want to clear.
    • Paper Setting: Restore all of the Paper Setting options to the factory default.
    • Copy Setup: Restores all of the Copy Setup options to the factory default.
    • Fax Setup: Restores all of the Fax Setup options to the factory default.
    • Fax Feature: Cancels all of the scheduled fax jobs in the machine's memory.
    • Advanced Fax: Restores all of the Advanced Fax setting options to the factory default.
    • Sound/Volume: Resets the sound and volume settings to the factory default.
    • Machine Setup: Resets all of the system settings, such as the machine ID, date and time, display language and save modes, to the factory default.
    • Set Report: Clears all records of your faxes sent.
    • RCV Report: Clears all records of your faxes received.
    • Phone Book: Clears the speed dial or group dial numbers stored in the memory.
  5. Press Enter. The selected memory is cleared and the display asks you to continue clearing the next item.
  6. Repeat steps 2 and 3 to clear another item.
  7. ORTo return to Standby Mode, press Stop/Clear.
http://www.support.xerox.com/support/enus.html

May 08, 2015 | Office Equipment & Supplies

1 Answer

Reset nvram


http://www.support.xerox.com/support/phaser-3300mfp/support/enus.html

Solution : Clear Memory and Restore Default Settings on the Machine NOTE:Clearing memory on the machine will remove information from the machine and restore factory default settings. Make sure that all fax jobs have been completed before clearing the memory, or jobs will be lost.
To clear the machine memory and restore factory default settings:
  1. Press the [Menu] button (located below the Display Screen on the Control Panel) until "System Setup" is displayed on the bottom line of the Display Screen.
  2. Press the [Enter] button.
  3. Press the left or right [Scroll] (arrow) button until "Clear Setting" is displayed.
  4. Press the [Enter] button.
  5. Press the left or right [Scroll] button until the option to be cleared is displayed. (Refer to the table below for additional information.)
  6. Press the [Enter] button. "Yes" will be displayed.
  7. Press the [Enter] button again to confirm.
  8. Repeat steps 3 through 7 to clear additional items.
  9. Press the [Stop / Clear] button to return to Standby mode.
Clear Memory Descriptions Options Description All Settings Clears all of the data stored in memory and resets all of the machine settings to the factory default settings. Fax Setup Restores all of the Fax options to the factory default settings. Copy Setup Restores all of the Copy options to the factory default settings. Scan Setup Restores all of the Scan options to the factory default settings. System Setup Restores all of the System options to the factory default settings. Network Restores all of the Network options to the factory default settings. Address Book Clears all of the fax number and e-mail address entries stored in memory. Sent Report Clears all records of sent faxes and e-mails. Fax Rcv Report Clears all records of received faxes. New Scan Report Clears the information about network scan sessions in memory.

May 21, 2014 | Xerox 3300MFP/X new 3300mfpx [a51t732]...

1 Answer

How to restore asus eee top et2203t to factory settings


One way to clear an Asus PC of problems or viruses is to restore it to its original factory settings. This will wipe the computer clean and give you a fresh start. The idea of restoring your laptop may be intimidating, but there is no programming involved. In fact, these laptops are designed to be restored in a short period of time.

1Turn off the Eee PC. Press the power button or select the shut down option from the computer's main desktop screen.

2.Turn the unit on and press the "F9" when the flash (logo) screen appears. A menu will appear with a list of options to choose from.

3.Select the "Restore Factory Settings" option from the bottom of the list in the menu and type "Yes" when prompted to verify the reset.


4.Press "Enter" when prompted by the computer to reboot the system. Wait a few seconds for the system to reboot.

5.Follow the prompts on screen to accept the licensing agreement and configure your settings.

Sep 24, 2011 | ASUS Eee PC 1005HA-PU1X-BK Netbook

2 Answers

I want to reset my sony vaio


I'm assuming you want to restore your computer to the factory settings, so here's how to do that.

1. Restart your computer
2. Hold down the ALT key and press F10 repeatedly as it restarts.
3. This should initiate the factory restore option, which will reset your computer to an out-of-box state.

Hope this helps!

Aug 25, 2011 | Sony VAIO VGN-T1XP/L Notebook

1 Answer

Restore my hp computer to original factory settings


Hi garygarame...
I would try to restore the computer to a time when it was working good.
Try this solution...
Left click on Start>All Programs>Accessories>System Tools>System Restore
Pick a date when the computer was working good
Otherwise you need to format your computer( you will lose everything)
Double Left click on "My Computer". right click on the main drive (normally C drive) and click on "format"...that will clear the computer of everything.
Then reinsert your recovery CD and reinstall your operating system.
Please take time to rate me

Aug 14, 2011 | HP Pavilion a705w PC Desktop

1 Answer

The screen is balck and the keyboard is locked but we can see that cpu is running


Hi.

Based on the information you have provided, it seems that the issue might be with the Operating System.

Hence, it would be better to restore the Computer to the Factory settings.

Restoring the Computer to the Factory settings would delete all the Data in the Computer.

Hence, it is recommended to backup all the important Data in the Computer,

Restoring the Computer to the Factory settings should resolve all the Software related issues.

If the issue still persists even after restoring the Computer, it would be clear that the issue is Hardware related.

You will find the detailed steps to restore the Computer in the below link:

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C291331&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=310144510&stateId=1%200%20310150078

Hope this helps.

Please feel free to contact for further assistance.

Thank you.

Suresh

Aug 08, 2011 | Sony VAIO PCG-K23 Notebook

1 Answer

I want to reboot my dell 1505 inspiron laptop to factory specs. Please help.


Note: restoring your computer to its original factory settings will clear most of the data off of your hard drive, including personal files. Be sure to back up what you need.

Some computers ship without a system restore, but your computer more than likely has it.
To restore your computer to its original state, do the following:
- Make sure your computer is powered off.
- Turn on your computer, and hold the 'Ctrl' key and the 'F11' key at the same time
- When the menu appears, select 'restore'
- If your computer does not have system restore, you will not be able to / not see restore
- Confirm that you wish to restore your computer
- Your system will be reset to its original state
- When finished, select 'finish' to reboot the computer

You will have to go though some of the menus that you did when you originally had your computer. Your computer should finish restoring after these menus.

Mar 30, 2011 | Dell Inspiron E1505 Notebook

1 Answer

Restoring my dell to factory settings


If you want to clear off all of your files and reset it to how it was when you first got it (Factory settings), hit CTRL + F12 when the computer is booting up.
See this link.

Jul 13, 2009 | Dell Dimension 3000 PC Desktop

3 Answers

Ibm restore to factory setting


You have not explained what is wrong with your computer.
Is the laptop working, does it boot up into Windows?
What are you trying to restore?
Are you trying to get into a previous Restore Point?
The Access button takes you into the BIOS, you can change the BIOS settings back to the Default settings (ie the factory default settings).
It is difficult to offer a solution without knowing the exact nature of the problem.

Nov 23, 2008 | IBM ThinkPad R50e Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...