Question about Graco Nautilus 3-in 1 Car Seat
You can check out Graco's user manual:
or their instructional videos on how to install a Nautilus 3-in-1 car seat here. Just make sure you are watching the right video for
Posted on Feb 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yeah its a bit tricky. ON the fron of the car seat there is a strap that goes intot he seat and has a button to lossen it. Press it down to lossen that strap then flip seat over and on the bottom you will find other end of the same strap and it has a brass t-fitting. Take it and pull it up the back side of seat and the shoulder straps fit into the brass fitting then tighten by pulling strap in front of chair.
HAve fun ;)
Posted on Jun 25, 2009
SOURCE: We have purchased 2 Graco
I am having the same problem with my car seat. May be we need to contact Graco to see if they can correct this problem. There is no way of saving a child if there is an accident or fire. My fingers hurt from trying to unbuckle. This is insane. Graco needs to recall this seats!!!!!
Posted on Oct 13, 2010
Tips for a great answer:
Jul 10, 2014 | Baby Gear
Jan 20, 2013 | Graco Nautilus 3-in 1 Car Seat
Just did it. It took two of us, but only a couple of minutes and no
tools (except a table knife) once we'd worked out what the problem was. The
reason the strap doesn't thread easily through the slot is that there is a sprung
two-part mechanism that needs to be held open. One person threads the strap through
while the other keeps the mechanism open.
1) Find the slot under the
chair that the strap goes into - turn the seat upside down; it's a thin gap you
can feel with your fingertip when you run your finger along the narrow back of
the metal strip under the front of the seat (not the base).
2) Remove the metal rod
that attaches the grey reclining lever. The rod is about 20 cm long and can be pushed
out without tools. Removing this rod seems to make it easier to open the buckle
mechanism. When replacing the rod later, you just have to line it up carefully with
holes (we used a torch to help us see them)
Make sure the strap passes under the metal rod at the bottom of the seat
back (you can see how here in a small photo here: http://www.englishforum.ch/attachments/sale-wanted/37565d1327058634-sale-maxi-cosi-tobi-car-seat-9mths-3-yrs-zh-maxi_cosi_tobu_small.jpg)
4) Push back buckle as
far as it will go (it goes back past vertical easily, then needs another firmer
Hold the buckle in this backwards position.
Insert a table knife (rounded and blunt, not sharp) into the space under
the buckle and push back the sprung, hinged plastic part that the knife touches
at the back.
Person 1 then threads the strap back through the slot, pushing until then
end comes out.
Tie a knot in the end of the strap so you don't accidentally pull it
Replace the metal rod in the reclining mechanism.
Mar 21, 2011 | Maxi-Cosi Maxi Cosi Tobi MAGIC ROSE 2008...
Oct 01, 2010 | Graco Nautilus 3-in 1 Car Seat
Sep 26, 2010 | Nania Solo Combination
Jun 17, 2009 | Graco Nautilus 3-in 1 Car Seat
Jun 11, 2009 | Baby Gear
May 08, 2009 | Graco Nautilus 3-in 1 Car Seat
Mar 22, 2008 | Nania Nuevo 3-in1
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: