Question about Hisense TC24FS2H TV

1 Answer

Locked remote i don't know what i did, but my remote control no longer controls my t.v. i have to manually push the buttons on the t.v. I have a Hisense T.V model HYDFSR-A202TY

Posted by on

  • coppernight Feb 15, 2009

    I have the same problem....I was did this and was able to fix it by pressing some button. However, none of the buttons seem to work.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I know this may sound silly but check the batteries. now if you allready changed them and your still having the same problem check the ir signal on the remote. now all you have to do is take any camera( camera phones work just as good) hold it to the ir sender on the remote press any button on the remote and look through the view finder on the camera. you should now see a light go off on the remote through the camera. if you dont see a light then you have yourself a broken remote. if you do then its possible its the tv ir reciever. and may need to be serviced. but hoping its the remote you can always get a replacment remote for cheep.

Posted on Jan 26, 2009

  • deleon_perez Apr 26, 2011

    I ALREADY DID THAT BUT IT DIDN'T WORK.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Insignia TV has a blue screen with parental cotrol the problem is I don't have a Control to pres display how can I unlock it???? HELP:(


Hello
When an Insignia TV is locked, it keeps you from watching all of your channels by only displaying a black screen. Insignia TVs are locked from a single button command on the remote control, so it is easy for you to lock the TV by accident. Since Insignia TVs can be locked so easily, it's important to know how to undo this command and unlock the TV yourself. So, unlock your Insignia TV with the push of a button and once again enjoy watching your favorite programs.
· Find the lock button on the Insignia remote control. The lock button is located on the third column from the left on the second row from the top of the remote.

·Stand within operating range of the Insignia TV, then aim the remote at the TV's receiver and press the "Lock" button on the remote control.
· Aim the remote at the TV and press the channel buttons to make sure the TV is unlocked. When the TV is locked, it shows a black screen and does not allow you to view anything else. If the screen remains black, press the "Lock" button again. If this doesn't work, change the batteries in the remote and start over at step
OK

Sep 17, 2011 | Insignia NS- 27" TV27 TV

4 Answers

Sansui TV/VCR/DVD combo


This solution is provided by one of our experts premtech


Child Lock

Combos
--Should have original remote. Press and hold the power button for 6 to 10 seconds


Combo Model T25208, V-Chip Forgotten Password
If you forget your password, simultaneously press VOLUME down on the TV/VCR front panel and the 0 number button on the remote for a few seconds. This resets the password and you can enter a new one.

Combo Model 13TVR62, V-Chip Forgotten Password
If you forget your password, press STOP/EJECT on the TV/VCR front panel and MENU on the remote simultaneously. This resets the password, but not the limits you’ve set.
Televisions with Parental Lock Feature


If you forgot your password for this feature, press the following buttons on the remote, one at a time. (Note: You must be in the password entry screen) Press, Mute, Display,Clear and Reset, this unlocks parental controls and you can now re-enter a new password.
OR TRY THIS..
Press and hold Menu on the TV AND volume down on the remote for 3 seconds. Nothing will appear on the screen, and the Parental Controls will unlock, and you can re-enter a new password with the LOCK PARENTAL CONTROLS

CTC169AU
Channels that have been locked can be viewed only when the PARENTAL CTRL function is set to OFF. This can only be done with the remote control-it can not be changed with the buttons on the front of the TV.

Therefore, after you turn on PARENTAL CTRL, you simply hide the remote control so that your children can not watch the locked channels. The locked-out channels will remain unviewable even if the TV is unplugged or the channels are autoprogrammed again. The only way to view locked channels is to use the supplied remote control to set the PARENTAL CTRL function to OFF.

The PARENTAL CTRL and the CHAN CTRL functions work hand-in-hand. The instructions below will first tell you how to turn parental control on or off with the PARENTAL CTRL function and then how to lock desired channels with the CHAN CTRL function.
1. Repeatedly press MENU to select SETUP MENU, and then press + or - to display setup functions. Repeatedly press MENU to select the PARENTAL CTRL function. . When this function is set to ON, PARENTAL CTRL is activated and any channels you locked with the CHAN CTRL function will not be viewable. . When this function is set to OFF, PARENTAL CTRL is deactivated and all channels are viewable.

2. To lock channels, press the MENU button to select the CHAN CTRL function. Select a channel you want to lock by pressing CHANNEL up or down. Then press +. The CHAN CTRL setting will change from NORMAL to LOCKED when that channel is locked. To return the channel to NORMAL, press the - button. Repeat step 2 for each channel you want to lock. If the PARENTAL CTRL function is set to ON while you are locking out channels, each channel will go blank as you lock it. When the PARENTAL CTRL function is set to ON and a channel which has been locked out is tuned, the TV will display the words PARENTAL CONTROL to let your kids know you have locked it.

CTC185's
If the front panel function buttons don't work, (menu, ch up/dn etc.) but the functions work normal with the remote, enter the "Channel" menu with the remote and turn "Parental Control" off.

CTC203's
In the event you have forgotten your password, perform the following procedure:
Press and hold for 3 seconds the TV button on the remote while pressing the menu button on the TV.
This procedure will turn off the parental lock and erase the previous password .

Another Possibility To Try For Various Models: If TV's in the Parental mode and askes for a password that's forgotten, Press menu on the TV, select Parental Lock #4 on menu, then with the remote press Mute, Display, Clear, and Reset buttons in sequence.

TX808 Chassis
If Parental Controls have been set and you don't know the password, do this:
Press and hold the volume down and the channel up buttons at the same time for 5 seconds.
Now you can reset the password to 0000, and using that password you can now access the V-Chip menus.

TV's (Made by Daewoo or possibly Apex, ie. GE model 24GP653)
The factory default pass code of 6688 is also the override code, in case the owner forgets their pass code. If that doesn't work, another place in the owners manual says to push Function and Mute on the remote at the same time. Function is the top right button.

Jun 28, 2008 | Sansui DTV2760 27" TV

1 Answer

My rca is locked don't have my owners manual how


Hello
If you have its original remote control, you can unlock it by one amoung the following methods. If you don't have its original remote control, try to gather it from any of your friends or relatives to get the lock out. Then you can use any other remote controls.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Jul 05, 2011 | RCA Standard (CRT) Televisions

1 Answer

My tv is locked i cant push anything to cut it on it is on but there is a key on the screen and i do not have the remote control what do i do.


hi,

To unlock your TV you must need the original remote of it. If you don't have then you have to purchase it. After the do the following for unlock you TV


Apex TVs have parental locks that allow you to block certain programs based on their rating. When this feature is no longer needed and you want your TV to display all programming no matter its rating, you must unlock your TV. Unlocking your Apex TV is done completely from your remote control and does not require any tools. The process takes less than 5 minutes.

1. Press the "Menu" button on the remote control and use the arrow buttons to scroll down to the "Parental Guide" option, then press the "Enter" button.


2. Type in the default parental code "6688" if you have not set your own code. If you have set your own code, type it in. If you set your own code and forgot it, override it by using "6688."


3. Use the arrow keys to switch the parental lock to "OFF." This allows all programs to be viewed no matter the rating. Press the "Exit" button on the remote and start watching all your channels

ok

May 22, 2011 | Apex Digital AT2402 24" TV

1 Answer

Have an universal remote with no codes. I don't


see on your remote control and find buttons "power", "code", "enter", "dvd" and next turn on manually your DVD. Now push both buttons at same time "dvd and code" until led light. when the led still ligth release both buttons. Try turn off your DVD using power button of your remote control as many times as be possible until your DVD coming off, after push "enter" button.

Mar 17, 2010 | Jensen TS2050J 20" TV

2 Answers

Child lock on, TV off, No remote or manual=cannot turn TV back on


i found out on line in the owners manual that if u still have a remote control that came with the tv, u press the tv/av button and enter button at the same time to disable the child lock. New problem: u can't do it with a universal remote, even if its programmed to a magnavox tv. I called the 800 # to buy a remote control and the rep told me that it cost $50, not including the shipping and handling. so my husband put the tv in the car, brought an extension cord and took it to a local tv repairman who was kind enough to use his remote to remove the child lock for us. finally someone who is helpful for free. thanks to all the nice people out there!

Jun 16, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

How to get TV/video mode without remote


some tv do that changing the channels.

in the control panels in the tv where r the buttons for change channel there must be video button, push it and there you go.

Good Luck

Jan 12, 2009 | Toshiba 14AF44 14" TV

2 Answers

Locked centrex television


I did research online and no luck. It seems that that company is no longer in buisness. I would think if you have the original owners manual there should be instructions to unlock the TV or maybe a phone number to call for support. I know that is the case with most brands sold here in the states. Good luck.

Nov 26, 2007 | Standard (CRT) Televisions

1 Answer

Remote control no longer responds for Konka K2001UM


You can test the remote by holding it very close to an AM radio receiver and pushing the buttons on the remote. You may have to tune the radio accross the AM bamd to pick up the remote's signal. You should hear a popping sound each time a button is pressed. You need to hold the remote near the tuner of the AM radio. If you can't pick up a signal then you need to replace the remote. If you do pick up a signal then possibly the remote receiver in your TV is bad or the remote is not putting out the proper IR signal. Stargazer

Aug 16, 2007 | Konka K2001UM TV

7 Answers

Blue screen with lock


If you push and hold down the display button the lock on the blue sceen will come off.

Jan 26, 2007 | Jensen TS2050J 20" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hisense Standard (CRT) Televisions Experts

Dusmantha...

Level 2 Expert

70 Answers

The Knight
The Knight

Level 3 Expert

68180 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Hisense Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...