Question about LG RHT497H Digital TV Recorder with 160GB Hard Disc Drive & DVD Recorder
OTA displayed after it tried to do a software update which just came back saying 'no updates' it did work for a while then it just won't work at all, if I hit home button to try and watch something i've recoded. I've tried everything from unplugging all cables into from switched off at the wall, also all TV cables, i've reprogrammed TV channels and tried to do a reset which comes back with 'no devices found' message. The machine now just has hello scrolling and it tries to power up every now and again as it does when you switch to watch something on dvd recorder but nothing further happens. Any help greatly appreciated.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Please Insert disk?
Hi Tool4theman, I have a CD/DVD r/w drive and it only says NEC DVD +RW. That is just the text the manufacturer has embedded in the device, not the results of any diagnostics. You've mentioned what program you are playing DVDs with but what are you playing your audio CDs with and are they commercial audio CDs? Have you tried running a diagnostic on your drive? Here is a link to the Sony CD/DVD diagnostic tool. Its meant for Sony drives but I have used this successfully on other drives in the past. When prompted for a blank disk us a CD. http://sony.storagesupport.com/cdrw/diagnostics.htm#dwn Let us know how it goes and don't forget to rate the posting.
Posted on Jan 03, 2007
SOURCE: I have an LG-1934S. The
To find out where the problem is, you will have to try this monitor with another PC or try another monitor with this PC first to narrow down the problem. Basic LCD monitor and TV troubleshooting guide: Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Please post back after what you find out so we can help you further.
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Basic LCD monitor and TV troubleshooting guide:
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Posted on Jun 24, 2011
SOURCE: The home theatre system LG
If you've disconnected the speakers and the fault is still showing then the fault is internal with the Amplifier and it's shutting down to protect itself from further damage.
Your only solution is to remove the cover and have a look at repairing it yourself or take it to a repair shop.
Posted on Jun 28, 2011
Tips for a great answer:
Feb 21, 2015 | Samsung Galaxy Tab 2
Jan 28, 2013 | Acer Aspire TimelineX 5820T-5951 Notebook
Nov 23, 2012 | Computers & Internet
Dec 17, 2011 | Nokia 5800 XpressMusic Smartphone
OTA - Over the Air Software Updates will be broadcast via satellite for the product when new updates are
available. Humax reserves the right for deciding when the software updates will be released.
Follow below to ensure that you receive the OTA Software Updates when they are released:
1* You are connected to a suitable satellite dish and are receiving the all of the freesat service.
2* The signal strength and quality are at a high level; if you are experiencing problems with the signal
then please do not continue with the download.
3* The product is in Standby mode each night allowing it to detect, download, and install the updates
* Please do not unplug the product from the mains during the software update procedure; this can
cause the product not to operate.
* Please do not remove the antenna cable from the dish from the product during the update as this can
cause the product not to operate
* For information on the release of new software or the changes made please visit www.humaxdigital.
* The download can take between 5 - 10 minutes to complete.
* During the update process you will not be able to use the product.
* During the software update scheduled recordings will not take place.
* You cannot schedule programmes during software update
Sep 18, 2011 | Humax FOXAT HDR DTV Receiver
Sep 03, 2011 | Cell Phones
The Kinect Sensor has insufficient power (C0051202)
Here's what to do to fix the problem:
Solution 1: Update your console software
Update Required: An update has been found, to apply this update you must restart your console.
Jul 04, 2011 | Video Game Consoles & Games
Jun 16, 2011 | HTC Droid Incredible Cell Phone
Mar 03, 2011 | Nokia 3600 slide Cellular Phone
Jul 01, 2014 | LG RHT497H Digital TV Recorder with 160GB...
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: