Question about Symbol MC9060

1 Answer

Screen in Landscape mode

I am trying to use my 9060 scan in 5250 Emulation in screen Landscape mode. Can I do it? If yes, could you let me know how to set my scan to work in this mode?

Thank you.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My scanner is scanning but why it's not coming in system notepad while scan sound everything is ok fine?

Your scanner may be set/programmed for a mode other than "keyboard wedge". Scanners typically come with a quick start guide with multiple barcodes that you can scan to program the scanner for your particular needs.
If you are trying to scan into Notepad or other text application, you will want to make sure the scanner is in keyboard emulation/wedge mode, and if you want it to have a "return" or "tab" after the scanned barcode, you should have options for that also.
If you have a used scanner and do not have the quick start guide or manual, you will want to look it up and download it from the manufacturers website.

Mar 26, 2016 | Barcode Scanners

1 Answer

My computer screen keeps going blue when i start it and saying a problem has been detected and widows has been shut down to prevent damage to your computer please help

You may have a virus. You may have corrupted files? Start by trying a Boot in Safe Mode. If that works, while in Safe MOde, Go to Start - All Programs - Accessories - System Tools - System Restore.
Choose to restore to an earlier time. Pick a date a few days ago when you know it worked fine. Even a week or two ago is fine. Let it do its thing. When it restarts (automatic) hope fully it will be fine. Up date your anti virus and do a full system scan.

Good luck.

Jul 19, 2011 | Barcode Scanners

1 Answer

My laptop's screen show "


Yes, but before you replace the hard disk, check hard drive cables and connections first. Also try to check if you can access Safe Mode.

Good luck.

Jun 18, 2011 | Barcode Scanners

1 Answer

We are running Wavelink or Avalanche software on the MC9090. Unfortunately, the top and bottom of the screen is being used seemingly by the Options and Wavelink toolbars, respectively. This reduces the...

The setting to hide the options menu and start bar can be done within the Emulation Parameters on a host PC.
From the main switch board run "Emulation Parameters" and then expand >>Emulation>>Display

This will give you a wide range of options which are useful to you:-
  • Hide Horizontal Scroll Bar
  • Hide Menu
  • Hide Vertical Scroll Bar
  • Start Menu
I would then set a key within:-

Menu Toggle Key

So that you could bring it up at any time when required. Most people use <CTRL><M> which is in fact <C><0x4D> (from memory).

Hope this helps.

If you need any more help then please do not hesitate to contact us:-

or TEL +44(0)1202 620955

May 05, 2010 | Symbol MC9090 Barcode Scanner

1 Answer

I need to map the F5 on an MC9090

You need to contact the Wavelink Help Desk...

They can walk you through it.


Billy Barcode

Aug 05, 2009 | Symbol LS2208 Handheld

2 Answers

Symbol LS7708 - "enter" key programming

You will have to set up a new Suffix -- the ASCII suffix for a "field exit" is 7009. You can contact the Symbol/Motorola Help Desk at 1-800-653-5350. Have you manual handy. If you don't have a manual, download one at

Billy Barcode

Apr 15, 2009 | Motorola Barcode Scanners

1 Answer

MC 9060 not retaining programming

We have the same problem, and according to our supplier we had to use the Regsave for saving the settings, due to internal proceudres, we haven't use the devices for a year, but now we have to use them again....
We have found this solution in the net, perhaps will help you...., now we are trying to find out the RegSave utility, if you find it, PLEASE e-mail me at THKS
Some brief notes about the use of RegSave on Symbol 90X0 terminals, specifically the 9060 with the 802.11b RF option.

You will need

Unzip this and locate the file RegSaveCED.exe in the 9050 folder.

Connect your terminal as a guest in ActiveSync and explore it using Win Explorer. Locate the c:\applications folder and copy the RegSaveCED.exe file to this folder on the HHT.

Now you can uncouple the HHT and click start menu and Windows Explorer to look at HHT's local files. locate applications folder and locate the RegSaveCED.exe file... double tap

Now screen RegSave EMEA TS appears.

In Registry section press "Create Template File"
Accept \Application\RegSave.tpl option offered
Click Create template and wait forever !

............. time passes ..................

The app rattles through all the registry entries and builds a file with them all in. Just when you assume it'll last forever it stops...

Now back to the main screen ...

Click OK (top right) to exit the app

--- oOo ---

Now set your IP parameters and RF bits... in fact anything you need.

........... time passes ...........

--- oOo ---

Now re-load the RegSave app.

Press the button in the Registry section entitled "Save Current Configuration"

I got some missing file error here which I rode over roughshod... basically it's looking for a registry exception file. You can create this but and it can be a list of ignored keys but for our purposes it doesn't matter so I just said "Yes"

It'll do some stuff regarding comparing and checking for differences, then it saves the changed bits.

Now you can exit RegSave and try rebooting... it should have saved the changes to the Registry and everything should be the same as before


Feb 27, 2009 | Symbol MC9060-G

1 Answer

Scanner symbol ls3070-i100US

These are the only drivers i could find that fit your description. Hope it helps.

Simple COM Port Emulation USB driver version 1.8.5
1.8.5 DRIVER Simple COM Port Emulation is one of the USB (Universal Serial Bus) interface modes supported by Symbol scanner devices. In this mode, a Symbol scanner...

123Scan Scanner Configuration Utility v2.7
2.7 UTILITY SOFTWARE 123Scan is an easy-to-use PC based application that will help you program your Symbol Technologies bar code scanning products. Allows easy scanner...

OPOS Driver for Symbol Scanners v3.24
3.24 DRIVER The OPOS Driver for Symbol Scanners v3.24 provides the tools necessary for scanning bar codes. OPOS (OLE for Retail Point-Of-Sale) is a standard programming...

JavaPOS Driver for Symbol Scanners v1.9.1
1.9.1 DRIVER  This driver provides the Java objects necessary to connect a Symbol barcode scanner to a host system based on the Java POS specification (a part of the NRF...

Oct 06, 2008 | Barcode Scanners

Not finding what you are looking for?
Symbol MC9060 Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Barcode Scanners Experts

Brian Friend

Level 2 Expert

132 Answers


Level 3 Expert

3944 Answers


Level 3 Expert

1111 Answers

Are you a Symbol Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides