Question about Blenders
Cook 'N' Stir 10 speed
Posted by Anonymous on
Im selling a Ronson corp. Blender model hb-2 it works great :D $40 dlls it haves manual.
im in san diego ca.
Posted on Mar 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blender has lost top two speeds
With my blender, some of the buttons stopped working, and I found a simple way that fixed it like new, with no special skills or replacement of parts. To determine if this fix will work for you, unplug the blender and press on each button. As you do this feel and listen for a definite 'click'. If you here it for the buttons that are working, and not for those that aren't, you probably have the same problem.
I discovered that there is a tiny mechanical push button switch under each button. The switches are held snug to the bottom of each button by a thin metal bracket. If you have heavy fingers, the force of pressing the buttons over time, causes the bracket to deform, moving the switches further and further away from the buttons until, eventually, no matter how hard you press, they are no longer close enough to depress the switches underneath.
The solution is to simply open the blender (with the power cord removed) and gently push the button assembly back towards the buttons. To get inside you need to pull out each of the four rubber feet, and unscrew the phillips head screws that are hidden under them. Next, seperate the top and bottom sections by gently pulling the power cord through the strain-relief (don't worry, it goes back together very easily). Before putting it back together, check the buttons (always with the power cored unplugged !!!) for the 'click'. If this doesn't work, you may have to take out the two screws that fasten the bracket to the blender, and bend the bracket hold-down tabs with a plier, in the opposite direction of the switches (that way when you put the screws back in, they'll move towards the buttons. That's it.
Hope this helps someone like me save about $150.00 for a new one and keep another 10lbs. of junk out of the landfill.
Posted on Jul 13, 2009
I'm trying to find a replacement Blade for my Black & Decker BL675 nut i'm having a really hard time finding one... Any suggestions?
Posted on Jul 23, 2010
SOURCE: Offer: multichef for parts
Hi, I have the 8346 Ronson Multichef. I don't know if they have the same processor bowl, but after using mine only twice the plastic tab from the lower part of the processor bowl snapped off. Unfortunately, the tab that broke off was what started the motor, so I now have a completely useless processor. Ronson stoacks everything but the lower part of the processor bowl. perhaps the processor bowl is the same, since the model numbers are so close?
Posted on Jan 04, 2011
Tips for a great answer:
Jul 29, 2011 | Cook's Essentials CEM848 Handheld Blender
Feb 04, 2011 | Bamix Deluxe Handheld Blender
Aug 07, 2010 | Hamilton Beach 50754 WaveStation 10 Speed...
Jun 11, 2010 | Hamilton Beach 50754 WaveStation 10 Speed...
Feb 18, 2009 | Oster 4172 10 Speed Blender
Dec 31, 2007 | Blenders
92 people viewed this question
Usually answered in minutes!