Question about Siemens Gigaset 4200 Cordless Expansion Handset

Open Question

Phone won't work - flashing BASE 1

My phone is completley locked. I can't dial out or recieve calls in

It is flashing BASE 1...how do I fix the problem

Posted by on

1 Suggested Answer

  • 1214 Answers

SOURCE: FLASHING BASE 1 - PHONE'S LOCKED

Unplug the batteries for 30-45 seconds. Reinstall, and attempt to re-register the handsets to the base.

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone not working


Hi Pam,
Try these..1...remove your telephone line from base unit and fix it into a working land phone and check whether is it having normal dial tone.If it's having engage tone(beep beep...)remove paralleled phones and re connect to cordless base unit.
2.If line is ok (normal dial tone with full volume) & still display indicates line is busy, your main base unit must be having faulty components inside.Commonly these defects happen in thundering or surges through telephone lines.You have to take full set to a repair shop.
Rana.

Dec 28, 2013 | Gigaset As300 Twin Dect Cordless Phone -...

1 Answer

My phone doesn't have dial tone. Each time I dial a number and try to call,it wont work. I call my phone but it wont ring. I need help on this. What happen to the phone? Or what should I do?


If you have another phone connect it to the wall outlet to see if you get a dial tone. This will indicate if your base unit is faulty.
Check the power adapter to the base unit, make sure it is getting mains power.
If the base unit has dual phone lines and if line 1 is only connected and the line 2 has beed selected then you cannot get a dial tone. In the chase press the line 1 to get a dial tone.
If your base unit has only one line then check the phone line at the wall socket make sure it is plugged in tight, also check the the connection at the base unit.
If this does not work then ring the phone company and get the to test your phone line, you may have a faulty line to your home.

Feb 03, 2012 | AT&T E2116 2.4 GHz Cordless Phone

1 Answer

The phone lights up when put to charge also the red light on the base,, but when the phone line is connected it wont work ..What do u think is the problem?


The battery in the handset could be bad . First I would test that the base unit is recieving dial tone by pressing speaker button on base unit. If there is dial tone then problem is in handset or in base unit communication to handset. Try resetting power to base unit. Check manual for any re-initialization procedure. If the base unit is not receiving dial tone then I would test that the phone line is delivering dial tone to the base unit by connecting a known good phone to the line cord. If the dial tone is not present , problem could be in line cord from outlet, outlet, building wiring, or service provider.

Dec 08, 2010 | Uniden Cordless Phone

1 Answer

Uniden 5.8ghz cordless W/2handsets has no dial tone cannot call out or recieve calls


There can be a lot of different things that could cause this. The first thing I would do is disconnect the telephone cord from the Uniden phon eand connect it to another telephone and see if you get a dial tone from it. If you do then we know that the telephon eline and the cord are OK so we go back to the Uniden telephone. Next, does the unit light up when you plug it in? are you sure that the telephone is getting AC Power? Are the displays on the handsets working? Does the handset display show "Handset XX" or does it show "Searching"? If it shows "Handset XX" then the base unit is getting power, if not the base unit may not be getting power.
If the base unit is getting power and the handsets are working and the power cord and jack were proven good by conecting another phone to them, then you would need to call uniden Customer Service for further trouble shooting or repair/replacement. the number is 1-800-297-1026

Jan 26, 2010 | Uniden Cordless Phone

1 Answer

No dial tone. Cannot call/recieve.


Have you tried placing the handsets in the base unit to resync them? (not the axillary charger)

Have you confirmed that the phone jack and wire are still working? (e.g. plug in a known-good corded phone and make sure the signal is still good)

Post back with the "Add comment" button on the right, and we'll see what we can do to get it fixed.

Jan 20, 2010 | Uniden 5.8GHz Cordless Phone

1 Answer

We have a eircom 6010 siemens phone and it is constantly falshing base 1 and wont allow us to make or recieve a call on the handset


I have and eircom siemens phone and it is also constantly flashing base 1 and wont allow us to make or receive a call
Debbie

Jan 20, 2010 | Phones

1 Answer

FLASHING BASE 1 - PHONE'S LOCKED


Unplug the batteries for 30-45 seconds. Reinstall, and attempt to re-register the handsets to the base.

Jan 26, 2009 | Siemens Gigaset 4200 Cordless Expansion...

1 Answer

Semi Dead Panasonic KX-TGA100N with ''C533'' displayed.


Panasonic KX-TG1050N Cordless Phone. Base handset (No. 1, KX-TGA100N) does not work, no keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and receive calls on extension phones 2 and 3.

Nov 11, 2008 | Panasonic KX TG1000N Cordless Phone

1 Answer

Phones won't pick up calls...say connecting


HOLD THE HANG UP BUTTON AND THE POUND BUTTON DOWN FOR 5 secons. select base unavailable....yes. then hang it up on the base and it will register to the base. if that doesn't work then unplug the base then plug it back in then put the reciever on the base.

Nov 20, 2007 | Uniden TRU9380-2 Twin Phone

3 Answers

V-tech 2498 landline phone with cordless


Tip 1 of 2 Recradle the handset for 15 seconds, then lift the handset and press PHONE. Tip 2 of 2 If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system: Step 1: Disconnect the power to the telephone base. Step 2: Disconnect the handset battery. Step 3: Wait a few minutes and then reconnect the power to the telephone base. Step 4: Reconnect the handset battery Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again. If that does not work, call the manufacture at 1-800-595-9511. Or take it back to where you purchased it and have then exchange it.

Jul 08, 2007 | Vtech Cordless Phone Battery for 2429,...

Not finding what you are looking for?
Siemens Gigaset 4200 Cordless Expansion Handset Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts

kakima

Level 3 Expert

96518 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...