Question about Zanussi IZ12 Front Load Washer

2 Answers

Skipping programs when the machine starts after maybe 2 minutes it skips to rinse cycle

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 916 Answers

Check the timer it sounds like it is either off or needs to be replaced.

Posted on Jan 26, 2009

  • machadojr_fe Jan 26, 2009

    Sorry just need to clarify it sounds like the timer setting is off or it needs to be replaced.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

It is due to faulty control board . You need to replace the control board . It is due to malfunctioning in control board.

Posted on Jan 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My maytag washer when i start it it fills then the cycle starts the timer will count down til it get to 13 min then jumps down to 3 min then shuts off it skips the wash cycle and the rinse cycle befor


sounds like you have a problem with the main control board. you can order a new one from appliancerepair.com and if it turns out not to be the problem they allow you to return it for a full refund. great company!

May 26, 2014 | LG Washing Machines

1 Answer

Fills with water, skips wash and rinse cycle, starts spin cycle and sprays water out of the top


I would look at lid switch on this model and plunger to lid .Under lid is spray flume that can be damaged by large loads ,check that close. put it in wash full and drop lid hard it may come on.

Nov 19, 2013 | Maytag Dependable Care LAT9206

1 Answer

Our Bosch Maxx 7 skips spin cycle of the washing program. The remaining time jump from about 7 minutes to 2 minutes


Possible that the program controller unit has some errors and so it does work erratically. Check on all connections to the program controller unit, check for moisture on the unit. Also remove power for few hours and see if there is any change.click on : washing machine tips

Mar 14, 2012 | Bosch Washing Machines

1 Answer

My washing machine keeps stopping on the rinse cycle and then i have to skip the cycle for it to keep working.


at any stage have you interchanged the hot and cold hoses due to a valve failure unless programmed the washer will call for cold water on rinse cycle but usually will fault if no fault occurs possible control board problem let me know how you go

Nov 05, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Can't skip wash cycle to spin hand wash


unleess there is a setting for bypassing this rinse cycle no u can't do it, u can on the old style machines with mechancial controls, but this machine has an electronic program and it can't be altered.

Sep 11, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Maytag washing machine skips rinse cycle


I found this problem with mine intermittently and it was because i had filled the machine too full that it was too heavy to initiate the spin. maybe try a lighter wash?

Jul 03, 2009 | Maytag Washing Machines

1 Answer

Saeco Primea Touch


If you use the milk feature, please make sure that you rinse after making a milk drink or the machine will automatically request a milk cleaning cycle which is different than a rinse. For example if you make a milk drink and you skip the rinse cycle and leave the machine without rinsing for more than 20 minutes it will schedule a mandatory milk cleaning cycle.

It is okay to skip milk rinsing if you are making drink after drink as long as you rinse after the last cup.

Hope this helps you out.

Saeco's First Authorized Service Center of New York
Cerini Coffee Services
www.CeriniCoffee.com

Oct 21, 2008 | Saeco Primea Cappuccino Touch Plus Coffee...

1 Answer

Skipping throygh cycles


Timer ? Are you referring to the main control board ? How much extra water is being added on the first cycle ?

Jan 14, 2008 | Maytag MAH6500 Neptune Front Loading...

Not finding what you are looking for?
Zanussi IZ12 Front Load Washer Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

shaun taylor

Level 3 Expert

1443 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...