Question about InSTEP Quick N EZ Bike Trailer

Open Question

Replacement harness/strapping for instep bike trailer

The whole harness system is gone an I wanted to know where, if possible , to get another.

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

SOURCE: Instep Turbo Elite Manual

how to connect it to the bike

Posted on Oct 11, 2008

  • 165 Answers

SOURCE: Can't find a replacement tube for wheel on instep bike trailer

Posted on Jul 06, 2009

  • 8197 Answers

SOURCE: How do you hook up an instep bike trailer?

Here is the manual to attach to bike.

I hope one of the 2 will help you.

Good luck nd please rate

Posted on Sep 25, 2009

  • 1 Answer

SOURCE: I just bought an InStep® Joyrider Bicycle

The hitch part that fastens to your bike rear axle has 3 pieces, a dimpled washer which goes on first then the hitch plate and a pin that holds the trailer to the hitch. Take off the axle nut (15 mm wrench) install the dimpled washer it goes on with the 90 deg tang facing the bike wheel and in the channel so it can't rotate. Then put the hitch plate on, mine faced down for the correct height, line up the dimpled washer with the bumps on the hitch plate to locate it properly. reinstall the wheel nut and be sure to align the wheel so it runs straight and true (I oopsed on this the first time) then attach the trailer, it is a 90 deg hook-up then you simply put the the pin in and you are good to go. The unique hook-up makes it so smooth and dampened that you don't even know it's behind you. We really love ours!

Posted on Apr 16, 2010

  • 1 Answer

SOURCE: I bought the Instep Pronto bike trailer last

On Ebay. Part SA047 for Instep bicycle trailer.

Posted on Aug 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wiring harness gone need to wire engine run circuit with 3 coils and 3 mag pick ups

Your year--make--model didn't post for some reason? That info would be helpful. has free wiring diagrams, so does
If you need whole new wiring harness, you could check with your local auto store or go to your local yard, see what you can find?

Jan 23, 2016 | Cars & Trucks

1 Answer

Replacement temperature sensor

To the best of my memory, the connector is part of the front chassis wiring harness. Believe me, you don't want to change the whole harness. I would suggest you call a few salvage yards that may possibly have a wreck they could cut the connector from the harness off of. The connectors are usually mounted by small plastic clips that insert into a hole in the bumper mount. You may be lucky enough to find the sensor, mount and piece of the harness off one car.
Hope this helps.

Oct 29, 2007 | Computers & Internet

1 Answer


the e320 has been known to have elect harness problems the insulation that was used deteriorated and wires were shorting out and or melting the whole harness ---the other is your bcm [body control module ] is damaged or gone bad but look into the harness first

Jul 24, 2015 | Mercedes-Benz E320 Cars & Trucks

2 Answers

How much would it cost to have my 1989 gmc k1500 350 rewired the whole truck?

At least $1500.00 Many hours of labor and that will kill you.

Oct 11, 2012 | Cars & Trucks

1 Answer

I want to reset everything to its original form i've tried to reset it but it only allowed me to reset it back a few hours and now i'm frustrated i don't know what to do i want everything gone all my files...

There are two methods to do it

1. Reinstall Vista from the Disks provided by manufacturer, during the process we can format the whole hard drive (OS partition) and install Vista as it it was installed in the factory.
2. Depending on the computer brand, there are programs available to reset your computer to factory defaults.

Please specify the brand/ make and model number of the computer to suggest the factory reset procedure.

Feb 02, 2011 | Microsoft Windows Vista Ultimate Edition

1 Answer

I have a F/P washer model 1w712e The machine will not finish the whole cycle and comes up with the fault 136. can you help as I live in remote area and its not easy to get a service man out.Thank you.

fault code 136.

Motor Stall
The Motor Controller has been unable to start the motor. Possible causes of this fault are: Faulty motor harness, faulty or jammed motor, seized bearings or seals, faulty Motor Controller module, faulty Rotor Position Sensor or harness.
Check the motor harness, connectors and motor for discontinuity. Also check the Rotor Position Sensor and associated harness for water, mechanical damage or corrosion.
Finally Motor Controller module could be gone

Nov 28, 2010 | Fisher and Paykel Washing Machines

3 Answers

2004 jeep grand cherokee windows will not work, door locks will not work, mirror controls will not work, interior lights will not go OFF!!!! I can't locate the fuse. Any recommendations

Also check the ground wire that goes through the rubber boot at the door hinge, mine broke on both sides and screwed up the electrical system

Jul 14, 2010 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
InSTEP Quick N EZ Bike Trailer Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top InSTEP Sport & Outdoor - Others Experts


Level 3 Expert

75197 Answers


Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you an InSTEP Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides