Question about Canon Cameras
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: E32 error with canon ixus 130
I have purchased recently canon ixus 130, the camera automatically shuts down after some 30 sec& shows a messege 'camera error,restart camera will autometically shut down error
Posted on Aug 19, 2010
SOURCE: Canon Camera Error E32. Camera
The most common problems in these small tiny cameras is the lens alignment. If you drop the camera with the lens extended this alignment will ****. If you are a handyman you can fix it by yourself by oppening it inside and realign/putting the lens in right position. Sometimes you can do that by forcing them to extednd manualy but that is very risky. If not handyman I recomand you to take it to a repair shop.
Posted on Jan 27, 2011
SOURCE: error e32 on canon g10
Just bought a Canon SX210, I can take only a couple of shots before the Camera gives Camera error E32 and shuts down, this is a consistent. Any hints?
Posted on Jun 26, 2010
SOURCE: My Canon IXUS 130 camera
Thank you for using FIXYA!!!
This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.
The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on May 06, 2011
SOURCE: How do I use the
Once you select the color accent you should see the word " menu" in the bottom left hand corner of the screen with a down arrow next to a picture of a tube of paint. This means hold down the menu button for longer than a second, then you can adjust the color to be accented in your photos. Any time you see the word menu and the down arrow on the screen it means hold the menu button for longer than a second for more options/setting adjustments.
Posted on Jun 06, 2011
Tips for a great answer:
Jan 24, 2018 | Canon Cameras
Jul 17, 2015 | Canon Cameras
Jun 22, 2014 | Canon Powershot 310 Hs Digital Elph Camera...
Mar 02, 2013 | Canon Powershot Elph 100 Hs / Ixus 115...
Sep 20, 2012 | Canon Powershot 100 Hs Digital Elph Camera...
Mar 07, 2010 | Canon PowerShot SD700 IS Digital ELPH /...
Jul 20, 2018 | Canon Cameras
518 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: