- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The E74/E6x/E4x/E8x are famous error codes that have
plagued many Xbox 360 gamers. This error codes will be displayed on
your screen, each indicating different problem with your Xbox 360. It's
usually defined by the single red light or 1 Red Light Error lit up at
lower right quadrant on the Red Ring of Light on your Xbox 360 console. E74: There is high
chance it's a scaler chip problem (the "ANA" or "HANA" chip near the AV
cable connection) it can also be caused by a faulty AV cable so check
that first. In some cases it is a problem with the GPU and may be
repairable by using the Xbox 360 Repair Guide. Xbox 360 E74 error has
reported to increasing a lot for the newer Xbox 360 version.
Hope this was helpful?
problem with power port it should give 3 red lights and error code 0020 which is hardware fail of board ports and death of the xbox the port on the motherboard came loose never had that problem but no rrod thats new to me and i have had lots of problems with the **** boxs since they came out try adding pressur to the board above the port or call customer support 1-800-4my-xbox honestly sorry i could not help to much
Code E74 1 red light flashing and error message on screen right? It is the scaler chip, it happens because the scaler chip starts overheating. If you stop the heat build up on the chips then you should be fine.
one red light means the video card is dead not the cord and unfortunately cannot be fixed and to make it worse this error is not covered by warranty, if you want it under warranty tel microsoft wen you ring that it has 3 red flashing lights (RROD) not 1 as this error is covered by warranty
Having the e-74 code is when the video chip on the 360 over heats and becomes un soldered your best bet is to turn the 360 on with a towel over it and wait for 3 red lights the call microsoft and tell them the 3 lights issue dont mention the 1 light or it will cost you dearly around 150$
Alot of people have this same problem,
E74 is an error prompt when the xbox goes into safe mode.
Te reasons for going into safemode is buntiful.
The best answer is from overheating.
Try resetting the xbox[little white button]