Installed vista on new macbook and found that drivers are missing

Hi Anon
Your laptop should come with an Ethernet connection as well as wireless connections, try making a wired connection via your Ethernet port, these are usually more reliable than wireless connections.
When I have experienced these sort of problems it is usually because of a missing driver.
Check that you have the proper drivers for your internet connections installed, these should come on a disk that is supplied with your laptop.
Finally check this link for Microsoft's official network trouble shooter.
http://windows.microsoft.com/en-gb/windows-vista/troubleshoot-network-connection-problems.

Actually, what you have to get is the Vista version of the High Definition Audio Codecs fom Realtek, install that and then listen to some nice music. :)

Thanks

Ok, so you commited the sacriledge of installing Windows on a Mac. Enough complaining... The Mac hardware is really tight to the Mac software. Some features of the Mac aren't understood by Vista (and XP for the matter). I ask myself if the F12 (eject cd) is working under Vista?

Hi, Im Bogdan, My HAMA webcamera metal pro does not work as Ihad installed the so named "driver" arcsoft w hich it seams to be only a interface! What can I do? my OS is XPome. Where is the real driver for camera. >>> Thank you very much!

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=120&modelid=10445#DownloadDetailAct

Click the Drivers and Downloads tab, Vista.

Pick the CanoScan toolbox and the driver.

Hi, you should try these drivers for Vista...has a preety nice install wizard (works on vista for me).

http://rapidshare.com/files/167170222/TM-http://rapidshare.com/files/167170222/TM-U220.zip.htmlU220.zip.html


good luck

http://tascam.com/products/us-122l;9,15,69,19.html

click on the following link for all your driver needs for the us-122

Before you install the new motherboard make sure you have all of Windows updates installed on the hard drive. Microsoft is working hard to include many new devices all the time. You should have no problem booting into Vista after the motherboard is intalled and your motherboard should come with a driver disk to install any drivers that Vista may miss.

What a great idea Marc! It worked!
"Hi, I just resolved the same problem. I installed from the VISTA preinstalllation list of printers the driver and files for the HP 830C/832C printer. The "install a new printer" on the control panel-printers page shows it on the list. After installation I went to the 830C/832C printer properties and selected it to be located in the USB virtual printer port where my 825C was connected (select any USB it does not matter). Now the VISTA believes that you have a 830C/832C printer on the USB and prints perfectly with this setup on the 825C.

Bye, Marc

Hi I found that you can download the drivers for vista here http://downloads.lexmark.com/cgi-perl/do... Good luck Redsocks