Question about GPS

1 Answer

Resistors R30 and R31 on pcb 4233-1288d-b completely burnt.

Resistors R30 and R31 on pcb 4233-1288d-b are burnt beyond recognition and need to be replaced. They conect directly to the voltage and resistance measurement terminal on my wavetek multimeter. I have searched everywhere for a wavetek dm27xt digital multimeter schematic in order to find out their sizes and types.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

R31 47 ohm 1/4 watt 5%
R30 100 ohm 1/4 watt 5%

Posted on May 30, 2009

  • 2 more comments 
  • Mike Jun 17, 2011

    Excuse me, resistor R11 and C01 on pcb 4233-1288d-b are burnt beyond recognition y need to be replaced, thank you very much

  • Bernard Jun 21, 2011

    I will try to find our wavetek multimeter in our office - I looked today but could not locate it. If I find it, I should be able to see the parts and tell you what they are. Bernard

  • wi no Jul 19, 2011

    r30 is 100 ohms, R 31 is 47 ohms

  • Bernard Feb 09, 2012

    R11 looks like 500 or 5k, green black, black, black then white - is 1% value
    with meter to measure across it, I get 903 ohms, but that may vary with front switch setting, I did not check that-but I can send u photo -
    C01 is chip cap, not easy to know value - could be .1 uf or smaller


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Intelliroute 520 wont connect to my pc

The answer to this question and many others can be found in the FAQ section on our support page at Additionally, for instructional videos on many of the TND & RVND features please visit the Rand McNally You Tube page at

To troubleshoot a connectivity issue please try the following:

  1. Ensure the cable is secure on the device and computer. Disconnect and reconnect the device.
  2. If still not connecting and the cable is secure press the rest on the back of the device while connected to the computer.
  3. If a reset does not work then disconnect the device from the computer, wait at least 10 seconds and try another USB port on the computer.
  4. If another USB port does not resolve the issue disconnect the device, restart your computer, then connect the device.
  5. If all the above fails you can Reinstall the Device Driver. Navigate to the Device Manager on your computer. Please note this will vary based on the operating system you are using. Once at the Device Manager screen locate Universal Serial Bus Controllers. Click the arrow/triangle to the left of the Universal Serial Bus Controllers to expand the drop down list. If the device driver is the issue one of the items listed will say Unknown Device. Right click on Unknown Device and select uninstall. Once the uninstall has been completed, restart your computer with the device still connected.

If the device is not recognized after trying all these steps you will need to contact Technical Support for additional troubleshooting. To properly diagnose and correct a connectivity issue you will need to have the Rand McNally Dock Installed, a broadband internet connection and your device available to connect when instructed to do so. If these items are not available, we may not be able to resolve your issue.

Technical Support is available:
Monday - Friday
7am - 6pm (CST)

Dec 25, 2013 | Rand Mcnally Intelliroute TND-520 LM Truck...

2 Answers

I need instrution book on a ibm r31 thinkpad

Most of those are included in the software on the computer when you buy it. What is the problem?

Sep 15, 2013 | GPS

1 Answer

How to register

Please go to this web link, you will need a Mini USB cable to complete the registration and download updates. They are available on ebay for the Garmin very cheap.

Apr 29, 2011 | Garmin GPS

1 Answer

My GTM 20 tip got unscrewed and the parts fell out. I put the parts together and then found out that both the car socket fuse and the GTM 20 fuse were busted. I replaced both fuses. The car socket works...

The GTM 20 can be repaired. It's likely that either you're not using the correct fuse or there's a short circuit. The short circuit would be caused by the metal tip, spring or fuse touching the outer part of the plug. There's a repair kit available from

Jan 26, 2011 | Garmin GTM 20 Lifetime Traffic Receiver...

1 Answer

The charger/traffic receiver glows green but it does not charge the unit. How can i test whether the fault is a, the charger, b the cradle or c, the unit


1st of all let me say im on my 3 cradle now for my 760 because the connection inside the cradle where it mounts to the board is pretty poor.

since you said the traffic/charger has the green light lite, that means the charging part of it is working.

you can verify if its the cradle or the connection on the bottom of the gps where the cradle mounts by using the usb cable supplied with your garmin.

plug it in for a while, then check the battery meter after you unplug it..if its charging, the meter would have risen beyond what it was before you tried to charge it. the same can be done with a regular garmin charger (the one that uses the usb connection for the car charger to charge it)



Apr 12, 2010 | Garmin (010-00583-00) for nuvi 750/760/770

1 Answer

I have a Garmin Nuvi 770 that won't "speak" when navigating

Frequently (about 20% of the time) when I have my Nuvi 770 plugged in, in the car and I turn it on, it gets stuck at the start up screen where it says, “Loading maps” I wait several minutes and it never completes. Then I turn it off and turn it back on and it comes right up, but with no voice. When I go to Tools > Setup > Language it shows no language and I cannot select one. I have to plug my Nuvi 770 into the computer, run web updater, it detects that I already have the software loaded and I select the option to download it again. When it has completed, I unplug the Nuvi and then go to Tools > Setup > Language and select American English.

Mar 22, 2009 | Garmin (010-00583-00) for nuvi 750/760/770

Not finding what you are looking for?
GPS Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts


Level 3 Expert

63242 Answers

Will Halftowaite

Level 3 Expert

503 Answers

The Knight
The Knight

Level 3 Expert

69570 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides