Question about Jacuzzi Signa 6 Whirlpool JAC-B540...

Open Question

How to fix jacuzzi hot tub with fl-1 code - Jacuzzi Signa 6 Whirlpool JAC-B540...

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 80 Answers

SOURCE: heater pump does not turn on Jacuzzi hot tub 325

Heater operates seperate from pumps. Do the pumps come on? Pressure/flow switch turns on heater, so if the pumps work, there is an issue with the heater element, the flow switch will usually prevent the spa from running at all and there will be an error code on the control panel.

Posted on Aug 19, 2009

  • 80 Answers

SOURCE: jacuzzi whirlpool hot tub, flashes Fl-1 has new filters,

Sounds like a bad heating element. This is located in a stainless steel tube under or around the main control box behind the cover around the tub. It is not hard to replace but should be done by a pro. The part is avaliable online.

Posted on Sep 28, 2009

Coastsider
  • 331 Answers

SOURCE: Jacuzzi hot tub model J-300 series with an FL-1

A flashing “FL1” display means the flow switch is
malfunctioning open, the filter cartridge is excessively
dirty or an “air lock” condition has occurred at the
circulation pump intake.

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to find a service man in the Seattle area to get my tub working. It has power but won't come on.


then look in a phone book for a plumber . I am sure there are more than 1

Feb 11, 2016 | Home

1 Answer

Jacuzzi j355 hot tub FL1 code flashing on control panel


sounds like the recirculation pump isnt working FL1 means no Flow pump 1

Aug 24, 2014 | Jacuzzi Pool & Spa

1 Answer

Newly installed jacuzzi only has hot water for about 30 seconds, then water is tepid only.


This issue will have nothing to do with the jacuzzi tub. You will find the problem exists in the way your home was plumbed by the plumber.
Somewhere there is a clog in the water line going to the hot water faucet.
Find that and you will solve your problem.

Rod
US Parts Center

Mar 06, 2014 | Jacuzzi Home

1 Answer

Jacuzzi hot tub, Water is too hot. Heats until it trips the system. I have replaced the analog temperature control,


1) Safety question first
Why hasn't the GFCI tripped.
If your spa is not protected by ground fault., then you are at serious personal risk.
http://waterheatertimer.org/How-to-wire-GFCI.html#arc-fault

2) Replace the element.
http://waterheatertimer.org/How-to-test-water-heater-element.html

3) If element is cracked, it can continue heating to ground wire, causing runaway heating.
This applies to spas, and water heaters of all type.

Dec 08, 2012 | Jacuzzi Pool & Spa

1 Answer

My hot tub top control is flashing SPA6,and hot tub is not heating up.


Here is a link for you to resource that error code.
click that link and scroll through them until you find your error code.

Rod
US Parts Center

Aug 19, 2012 | Jacuzzi Pool & Spa

2 Answers

Can't unlock jacuzzi hot tub control panel


control panel not working, cannot control or work control buttons, stays in econ mode all the time. Nothing else works.

Nov 27, 2010 | Jacuzzi Pool & Spa

3 Answers

What does FL mean on my hot tub?? water doesnt circulate but is still sort of warm...


FL could be a code for low flow. If you have no circulation this sounds like it. If your pump runs and you have no flow you could have a problem with your pump. Or if you have the tub drained then it could be an air lock, if you open the drain valve till you get water out that should fix that. Also check to be sure the isolation valves are open under the spa. I hope this helps.

Feb 07, 2010 | Qca Spas Dream Series Dream Master Hot Tub...

1 Answer

Jacuzzi hot tub model J-300 series with an FL-1 code. I have shut off power at box and restarted a couple of times and the circulation pump reset. Now the reset won't happen. Both pumps still operate and I...


A flashing “FL1” display means the flow switch is
malfunctioning open, the filter cartridge is excessively
dirty or an “air lock” condition has occurred at the
circulation pump intake.

Jan 06, 2010 | Jacuzzi Signa 6 Whirlpool JAC-B540...

1 Answer

Jacuzzi whirlpool hot tub, flashes Fl-1 has new filters,


Sounds like a bad heating element. This is located in a stainless steel tube under or around the main control box behind the cover around the tub. It is not hard to replace but should be done by a pro. The part is avaliable online.

Sep 24, 2009 | Jacuzzi Bath Nova H530 917 Black Soaking...

Not finding what you are looking for?
Jacuzzi Signa 6 Whirlpool  JAC-B540... Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

Mike

Level 3 Expert

4336 Answers

john h

Level 3 Expert

10978 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...