Question about Logitech Televison & Video

Open Question

I have a Genesis MX900 that is stuck in "test mode". How do I fix it so the remote can be used?

Remote flashes and shows test mode: LCD good....IR Out good. Unable to get into normal operation mode

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: RCA RCR311W remote

1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

Posted on Jan 24, 2008

Ad
premtech
  • 934 Answers

SOURCE: Expressvu remote to turn on Viewsonic TV

http://www.remotecodelist.com/remotes/

Posted on Feb 10, 2008

  • 1 Answer

SOURCE: Program Comcast remote to operate Samsung 46"LCD

The answer depends whether its a Comcast DVR Remote or a regular one. The DVR codes are 4 digit -- the others are 5 digit. I got 0060 to work for my DVR remote.

Posted on Jun 02, 2008

  • 51 Answers

SOURCE: Echostar IR remote (Dish)

to set remote to tv
1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead

to set remote to receiver you need to access system info, if there is no sys info button on your receiver turn power off and press the up arrow, then press record 2 times on the remote,

Posted on Aug 06, 2008

  • 1 Answer

SOURCE: Dish 20.0 IR Remote works for awhile then it

I MAY have a solution!! We too have the VIP722 Dish Network receiver. Ours is the "K" model. I called the place where we purchased the TV and they said that the "brightness" on the TV may need to be turned down. He walked me through this, and it worked. The remote WORKS now!! Our TV is a 40" Sony Bravia that we purchased a couple of months ago. Evidently at night, the TV was so bright in the room, it interfered with the Infared Remote control. By turning down "off" brightness detector on the TV, the IR remote was able to send the signal to the receiver. Our TV is on a cabinet and the receiver is directly underneath on a shelf. I hope this solves your problem and anyone else's that may have this problem with the remote.

Posted on Mar 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MX900 repeating commands after learn


please go to customer.comcast.com and get the support online via chat or phone, and explain the problem
God bless you

Jul 31, 2012 | Universal Remote Control MX980 LCD Remote...

1 Answer

I cant program my dish network remote to work with my emerson tv


Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. In order to program your remote to your TV you will need to first locate the model number of the remote. The model number of the remote will be located on the back of the remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best remote codes for our more popular models of remotes. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at Cheri.Torres@Dishnetwork.com.

Models of remotes Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 632, 516, 669, 627.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 667, 666, 233, 733, 684, 846.
4.0 and 4.4 IR/UHF remotes - codes 733, 632, 569, 516, 537, 627.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 632, 569, 764, 733, 516.
20.0 IR and 21.0 IR/UHF remotes - codes 672, 632, 654, 516, 777, 846, 672.

Instructions for addressing the remote to the TV
  1. Turn the Television On.
  2. Press and hold the TV Mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Sep 25, 2011 | Emerson LC320EM8 32 in. LCD TV

1 Answer

I need code for remote to programme dish network on one remote


Hi, my name is Cheri Torres and I am with DISH Network Customer Service. Each of our different models of remotes have a few different codes that it could work with. I will list here for you the best codes for the more popular models of remotes that we have as well as the instructions for addressing the remote to your VIZIO TV. I hope you find this information useful and if you have any further questions let me know. :)

Remote model #'s Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 505, 165, 671, 627, 520, 758, 766.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 627, 505, 506, 006, 457, 520.
4.0 and 4.4 IR/UHF remotes - codes 505, 627, 766, 864, 593.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 627, 505, 678, 458, 825, 758, 520, 766.
20.0 IR and 21.0 IR/UHF remotes - codes 505, 598, 627, 523, 520, 720.

Instructions for addressing the remote to the TV
  1. Turn the Television On.
  2. Press and hold the TV mode button until all the other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once.
    Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Sep 08, 2011 | Vizio 42 in. LCD TV

1 Answer

The remote control of my 26" LCD Tv does not wprk any more, so I need to either fix it or replace it, how and mhere. Santiago Fregoso 323 564-0675 ...


You need to find out if it is the remote or the IR receiver in the TV is bad.
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

Jul 14, 2011 | Element Electronics 26 in. LCD TV

1 Answer

I HAVE A 55 INCH LCD ELEMENT TV THE REMOTE QUIT WORKING IVE DONE THE USUAL FIXES AND NOTHING HELPS


Please clarify the 'THE USUAL FIXES'
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com
http://www.remotecontrolscenter.com
http://www.newremotecontrol.com/
http://www.replacementremotes.com

http://www.newtvremotes.com

http://www.everytvremote.com/

Jun 16, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

#1 remote in IR Mode, #2 remote in UHF mode, dual HD receiver model 722; #2 remote works perfectly, #1 remote works for a while then stops working. Have to hold the remote within an inch of the IR on the...


bp22911,

It sounds like it may be an interference issue with the IR. Some LCD TV's can cause interference with an IR signal which will cause problems with the remote. Something you can try to fix is disabling the Auto Back-Lighting feature on the TV itself and see if that helps. If not, the easiest way to fix would be to make the TV1 remote UHF.

This would require a 21.0 remote as a 20.0 is IR only. Look on the back of the remote at the top to see what model you have.

With a 21.0 go to System Information. On the back of the remote inside the battery cover is a switch that says IR And UHF and make sure the green 1 is showing. Flip it to UHF and press Record 3 times. The Primary Address should now have UHF in it. Try the remote and see if it works.

If it doesn't or you continue to have problems you can post here or email me at thomas.faust@dishnetwork.com

Tommy Faust
DISH Network

Apr 13, 2011 | DISH Network IR Remote Control

1 Answer

I have a sony KDL26L4000 26" and for a unknown reason it wont turn on when using remote i have tried new batteries you have to press up on remote control or 1 on remote control and the green led keeps...


It sounds like the key on the remote is stuck. In your case, if you see the flashing light on the camera screen without pushing any button, then for sure one of the button is stuck.
Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.

Jul 10, 2010 | Sony Bravia KDL-32V4000 32 in. LCD TV

2 Answers

Remote not working


i've a philips video player model no  ( DVD622),remote not working 

May 23, 2009 | Philips DVDR3575H/37

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Jerry Umali

Level 3 Expert

979 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Logitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...