Question about Yamaha RX-V463 Receiver

3 Answers

Problem is starting Auto Setup on my Yamaha rx-v463 receiver

I have a problem with the Auto Setup on my Yamaha rx-v463 receiver. I see the OSD that says hit enter to start on the remote, but when I do that it doesn't start. I checked the remote and it is working fine. Is there something that I'm not doing, or is not setup correctly. There are no errors on the screen.

Thanks.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You need to press the AMP button before you press the ENTER button. Always press AMP first when selecting menu, enter, any surround mode, or one of the amp functions in ORANGE above the green numeric buttons.

Got this from Yamaha.

BG

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I spent about an hour on this one. Make sure your input is on Multi-Ch and then hit enter. See if that works.

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Make sure the supplied microphone is plugged in as well. 

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a owners/service manual for a Mitsubishi M-VR400 Receiver.


Try Googling (Mitsubishi)(M-VR400)(manual) without parens.

Jan 10, 2017 | Mitsubishi M-VR400 Receiver

1 Answer

How do I connect the TV to the receiver. An RCA TV Model #LED58G45RQ TO Receiver KENWOOD Model# KR-A3060 For Audio


If your RCA TV has left and right audio outputs on the rear, connect them to corresponding inputs on the rear of your Kenwood receiver.

Jan 09, 2017 | RCA Audio Players & Recorders

1 Answer

Denon receiver won't turn y


By creating a makeshift gel wrist pad for his mouse hand, we were in a position to eliminate the source of this discomfort also. AmanStino Ultra Slim Lightweight Smart shell Stand Cover with Auto Wake...

Jan 09, 2017 | Denon Audio Players & Recorders

1 Answer

THE SYSTEM IS CONNECTED DIRECTLY INTO THE RECEIVER THAN INTO THE MONITOR. AS FAR AS I KNOW IT IS NOT CONNECTED TO MY INTERNET.


one thing that you can do is turn on the auto login feature if the screen goes blank or the login session times out. I am not aware of any reason why the system would time out. The auto login setting will log you in in the event your screen goes blank.

Jan 08, 2017 | The Audio Players & Recorders

1 Answer

Yamaha rx850 stuck on tuner mode and volume nob has a blinking light no sound mybe stuck on standby mode?


Are any of the buttons stuck on/in , which would jam the processor?
Maybe the tuner button stuck in? Try spraying them with switch cleaner on the front. If not.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 07, 2017 | Yamaha Audio Players & Recorders

2 Answers

No center channel sound on my Yamaha receiver


Is the center channel amp blown? How about checking the center channel input wire for signal?

Jan 06, 2017 | Yamaha Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

Not finding what you are looking for?
Yamaha RX-V463 Receiver Logo

Related Topics:

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4751 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...