Question about Olympus FE-140 Digital Camera

1 Answer

Everything is working ok, however, when i take a photo it turns out with too much light in it. Before taking the photo the picture is in normal colour fucus. The menu has not been changed or any buttons adjusted. The camera was working ok up till now.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 60 Answers

Hi Are you sure that the exposure setting of your camera is kept in 0 position?.. if it is in +ve compensation the image will get over exposed under normal lighting condition. If exposure is set to 0 , you try to do a factory reset . If this not solving your problem then it must be the problem with the camera firmware,get the new firmware updated from olympus. all the best sreejith

Posted on Jul 16, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Why do my in door pictures come out looking very red or oranfe


Unless you tell it otherwise, your camera sets its colour profile based on the colours as seen under natural daylight. If you are using artificial light, the colours will actually be different. Tungsten lighting gives a a yellow/orange colour and fluorescent tends more towards the green. You need to find the White Balance control in your camera's menu and set it for the lighting in your scene. IF you have several differnet types of light, then you might need to work on the image in a photo editing package such as Photoshop or PS Elements.

Search Google for articles on lighting colour casts.

Jul 28, 2014 | Canon Cameras

1 Answer

Cannon powershot s3is turn on to take pictures and the led screen is black cant take pictures everything else works


this is a normal occurrrence in devices containing CCDs and does not constitutes a bad functions. (tHIS image will not be recorded when still photo, but it will be recorded when shooting movies.
Remember the in the LCD monitor will darken in strong SUNLIGHT or bright light.

Sep 22, 2012 | Cannon Cameras

1 Answer

D7000 in p/s/a/m all in b/w mode cannot find how to put back to colour


Your Picture Control is set to Monochrome.
To change the Picture Control, press the MENU button Select "Set Picture Control" from the Shooting menu, press cursor-right, use cursor-up/down to select the desired Picture Control, then press the OK button.
Full details are in the "Picture Controls" section of the manual (page 131 in my copy).

Feb 28, 2012 | Nikon D7000 Digital Camera

1 Answer

I turned my tv on and the picture was green and purple. Had to adjust all of the colours to get a somewhat normal picture but it still isn't what it should be.


Turns out it was a problem with my HD satelite feed. Blueray worked perfectly. Turned tv on this morning everything back to normal.

Jan 25, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

2 Answers

My d40 won`t take pictures


Try Blow cleaning the Memory card slot ... sometimes dust does that

Oct 05, 2008 | Nikon D40 Digital Camera with G-II 18-55mm...

1 Answer

Printing photos


its ok I solved it! I didn't realise that all the photo cartridge does is gloss over the colour picture produced by the colour cartridge. I simply had to replace the colour cartridge which had run out, so now its all working perfectly!!

Apr 08, 2008 | HP DeskJet F380 All-In-One Printer

2 Answers

LCD screen shows weird colours


Gimbo again. Think LCD damaged will need to repair. Pics. as normal when viewed or printed.
Why has nobody commented?
How much to replace screen? Any ideas?

Feb 16, 2008 | Cameras

1 Answer

Camara powers on but will not snap picture!


did you just try to press the shutter button halfway?if yes...press in all the way through...if still does not take a picture..master reset...

-press menu
-press right to go to setup
-go down to reset
-highlight yes then press menu to ok it
-turn off then on then try to take a picture

hope it will help...(",

Dec 26, 2007 | Samsung Digimax S500 Digital Camera

3 Answers

Black viewer and black photos


THE MOST LIKELY REASON FOR THIS COULD BE EITHER THE SHUTTER IS NOT OPENING(IN THIS CASE WHEN YOU HALF PRESS THE CLICK BUTTON YOU SEE SOME SORT OF SNOWY PICTURE )IF NOT THEN THE CCD HAS GONE FAULTY AND IN BOTH THE CASES THE HARDWARE NEEDS TO BE CHECKED THERE IS NOTHING YOU CAN DO ABOUT IT YOURSELF

Nov 17, 2007 | Fuji FinePix F20 Digital Camera

1 Answer

YAKUMO 37 Digital light problems


It's either a white balance issue or an exposure issue

Jun 05, 2017 | YAKUMO Computer Products MegaImage 37...

Not finding what you are looking for?
Olympus FE-140 Digital Camera Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...