Our fisher price camera doesn't turn on....it's just completely dead. Batteries are new. I can't find a problem with it. When I plug in the usb...it shows there are no pictures in the file. Any suggestions? Thanks
wont turn on... when i plug in usb, screen comes on but nothing works
-   My daughter too is facing the same problem. replaced batteries twice. It switches on only for 2-3 seconds and then dies off. what to do? Ananth from Mysore, India-   askathu
-   Our son's camera is having the same problem. It acts like there are no batteries in the camera at all. I took the sugestion of testing the white switch inside and it still won't turn on. VERY DISAPOINTED! Fisher-Price is suppose to have great products. My 3 year old was upset when he got it for his birthday and now it's nothing but trash.-   Guest
Apr 01, 2009
-   there are 3 orange wires, and if you know which ones, which ends do you connect? I tried this and picked the orange that connected to the letters bat on the green board. There was no change
I have 2 of these camaras thjat were left outside and don't turn on now-   elkelly602
Feb 28, 2009
-   Brand new and won't turn on. It's as if there are no batteries in it but we have switched out three different sets of brand new batteries.-   Kakalacka
The problem is a small toggle switch inside the keyslot where the battery access door goes into. I am not sure yet why it quits getting triggered, but taking the camera apart and bypassing this swich will fix the problem. You can check to see if this is your problem without taking the camera apart by opening the access door and sticking a small screwdriver into the keyslot and flipping (gently) the little white toggle toward the back of the camera and then turning the camera on with the power button. If it comes on then the switch is your problem. I assume they put this switch in to kill power when when the access door is opened so that the camera doesn't get double power when a usb cable is plugged in (I imagine you will FRY your camera if you bypass this switch and then forget and plug in the usb without popping out the battery pack). There are eight screws that hold the cover on the back of the camera, you have to pry out those little pink pegs and then you will need a triangle bit to remove the security screws to access the inside of the camera. The two wires (red and orange) are the two that need to be connected to bypass the switch. write on the bottom of the battert pack (remove before plugging in usb) if you do this modification so you remember to remove battert power before pluggin in the usb. If you don't know what you are doing then I would suggest letting someone with some electronics experience do this.
make sure the door is closed all the way. use a phillips screwdriver to turn the lock (even though it is possible to close with your fingers). Closing the door all the way clicks that white toggle that someone else mentioned into place. our camera works just fine after many frustrating attempts to fix it!
I just had the same problem. I have read all the troubleshooting guides to try and fix it. I got frustrated and did it myself. Try unlocking the door and hold the power button down as you lock it back. After trying this my sons camera turned right on. I hope this helps someone else.
On the screen there is an icon of a memory card with a lock. Can't get camera to work. Have cleared...
(More)
On the screen there is an icon of a memory card with a lock. Can't get camera to work. Have cleared all the old pics off card.
I have the fisher price digital camera l8341 i got for my kids about a year ago. the kids have been...
(More)
I have the fisher price digital camera l8341 i got for my kids about a year ago. the kids have been taking pictures and now want to print them. Its been so long i dont remember if i need a driver to view the photos on the pc
I have a fisher price smart cycle with no instructions and the controls on the handlebars aren't...
(More)
I have a fisher price smart cycle with no instructions and the controls on the handlebars aren't working. Any suggestions on what to check would be helpful. Thanks