My kenwood radio is in standby how do i change it?

Try to press the reset button on Kenwood (It returns to factory
settings when the reset button is pressed)

Hi, is the red light that says power On? If not, it could just be the fuse since I had the same problem. If you take the lid off, it should be in the left rear and is a 250v 6amp fuse. I had the same problem where only the standby light and the input lights were on. Neither the radio and cassette lights were on.

Hello... sorry to hear you are having problems. The correct procedure is to press the "SRC" button and put the player in standby "STBY" mode. Once in standby mode, press the small button labeled menu on the bottom right corner and hold it for 2-3 seconds. "CLK" will appear. Press the small button inside of the "square" on the right side of the radio and hold it for 2-3 seconds. The clock will appear and will be flashing. Use the up and down arrows on the "square" to change the hour and the left and right on the "square" to change the minutes. After you get it set, press the menu button once more on the bottom right corner and it will take you back out of the menu. Hope this helps!!

20 year car audio/video installer
Bay manager

go to kenwood wesite to down load instruction manuals

Put the radio in standby by toggeling through the src menu. once the radio is in standby hold the function button until the menu pops up, scroll through the menu till you find the AUX feature, and set it to ON.

You have to turn the AUX on. Hit the source button till the radio goes in to standby mode. then press and hold the menu button.. toggle through till you find the AUX option, and set it to on. After that you should be able to just use the source button to select AUX

Hello Tim-----your radio has menu options that can be changed- one of these turns on your aux port. to access this GO TO www.kenwoodusa.com on the top of the page click on support then on the left side of the page click on user manuals now on the right side of the page type in k and then scroll down until you get to your model (kdc135) -----on pages 12-13 you will see the instructions to turn on the auxilary mode. If you have any problem drop me an E-Mail at [email protected]


Good luck


Merle

http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/#_

Your going to need to pull off the battery cable for about 2 to 5 minutes and see if this will reset the radio. Good Luck