Question about HP 17 1740 DVI Rotating LCD Monitor w/USB Hub Silver/Black -

3 Answers

My Monitor keeps going black

I just got a HP 1740 Monitor used from goodwill. It was working just fine when i got it a week ago. Now when i boot up just fine like normal and show starting windows. Then about 2 seconds after it starts windows it goes black and says no DVI Input and i have tried changing the sittings but i wont stay on long enough for me to do anything.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • HP Expert
  • 30 Answers

If the screen is black or blank, but an error message such as No Signal displays on the screen, the problem might be related to the video signal. To troubleshoot, use the Flat Panel Monitor Displays Message About No Signal, Signal out of Range, Sleep, or Power Save. Here is also a fast solution for your monitor you directly connect with HP customer support and get solve your problem Toll-free number is +1-877-227-5694 HP Technical Support Number 1 877 227 5694 HP Tech Support

Posted on Sep 11, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If you can try the monitor on a different PC to make sure its not the monitor if the monitor is working on the other PC then its your PC you can try booting in safe mode and check your settings if its not settings then try cleaning or replacing the video card

Posted on Sep 10, 2017

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 219 Answers

Sounds like you have something overheating in the screen pull the back cover and blow it out.

Posted on Oct 21, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 19 Answers

SOURCE: i have HP Pro3000MT, and

you need a dvi to vga adapter not a dvi to vga plug and you must also go into your graphics card setup catalyst control center if its ATI Nvidia Display manager for Nvidia if you boot the computer with it pluged in and you can see the boot screen on bolth displays then its an os thing just right click and select the display manager the activate all display's through the managers

Posted on Apr 02, 2011

  • 2 Answers

SOURCE: how do I fix the error no vga input signal no dvi input signal monitor going to sleep

Check if you VGA is properly settled in the PCI slot. Try to take it out, clean the slot for dust.
If that doesn't help, it is well possible that you VGA is not working any more.

Posted on Jun 10, 2012

  • 30 Answers

SOURCE: HP w2207 no vga input signal, no dvi input signal monitor goes to sleep

There is no signal coming from your PC.
excuse some of the solutions as sounding dumb, but we have to explore all possibilities.

Check the power cable going into the computer
Check the power input disconnect switch on the back of the power supply and make sure it is on
If the pc is plugged into a power bar, make sure it is turned on and the breaker isn't tripped
press power on the PC and make sure the lights are coming on.

now for the solutions that may actually help.

disconnect the power from the PC
if the video is on a card, remove and re-seat the video card
hook the power back up, connect the monitor and try again.

the CMOS on the computer may need to be reset.
I hate totally clearing the CMOS, so what I usually do is remove 1 stick of ram and power up. If the system is alive again, power down, put the RAM back in and power back up.
If that doesn't work, turn the system off, put the CMOS jumper to the CLEAR position for 15 seconds, put it back to the Normal position and then power back up.

Basically, if the monitor works on your friends system but not on yours, the the problem is your system, not the monitor (assuming it isn't working fine til it gets into windows...if that's the problem, you have a driver or configuration problem)

Posted on Jun 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I do to get a screen that is frozen on a hp2010i monitor it is asking for language but the cursor on my mouse wont go to the selection


HP Monitor Problem - YouTube

? 1:35
https://www.youtube.com/watch?v=RYLaefQQdDY
Jul 22, 2009 - Uploaded by 7TimeToShine7
So I can use the monitor like I am using now but when themonitor goes to sleep I ... I tried it with a different computer and the monitor was able to re-find the ... How to fix or troubleshoot a blank or black screen not powering up ...

Monitor message" Power Button Lockout" - HP Support Forum

h30434.www3.hp.com > ... > Video/Touch

Feb 2, 2011 - 10 posts
Solved: New HP 23" monitor - HP 2310m Accidentally held down the power button too long; now I can't get the monitor to turn completely off. ... How can I turn the monitoroff completely and clear the message "Power Button ..... 8) · HP PCs - Error Messages Display on a Black Screen during Startup or Boot ...

OSD Lockout on my desktop monitor - HP Support Forum ...

h30434.www3.hp.com > ... > Boot

Dec 25, 2010 - 9 posts
If that doesn't work then go into the monitor's menu and do a factory reset. ... it looks like those button get stuck and doesnt work anymore so this is the ... OSD lockout prevents the OSD menu from opening on the screen when ...

Jan 03, 2016 | HP 2010i Black 20" Widescreen LCD Monitor...

1 Answer

How can i connect DirectTV to the hp 1740 monitor ?


Your HP 1740 Monitor uses:
  • One 15-pin mini D-sub analog VGA
  • One DVI-D (VGA analog or digital)
as for your DirectTV box you have at least an RCA and a HDMI to connect to Display devices that "DOES'NT MATCH" with your preferred monitor.

Your only chance to make it happen is to get a HDMI to DVI adapter (like this one: http://images.thomann.de/pics/prod/249861.jpg ) to output your digital box to your monitor.

Aug 22, 2014 | HP 17 1740 DVI Rotating LCD Monitor w/USB...

1 Answer

Hp 1740


You might need to replace the sound card or download the audio drivers for your motherboards audio.

Apr 16, 2014 | HP Audio Players & Recorders

1 Answer

My hp dv5215us laptop monitor broke several months ago. I've been using the computer with an external monitor plugged in to the vga port, but I turned it on today and the external monitor isn't...


Hardware failure of the motherboard - most likely something went wrong with the northbridge.
The repair will cost way more than it's worth, this laptop is effectively dead, time for a new one

Jul 20, 2011 | HP Pavilion dv5215us Notebook

1 Answer

My HP Lcd L1740 Monitor works fine except I can't get the usb ports to work. Please Help.


hi i have hp lcd 1740 have power but skin is white pls pls ane body give me soletion
pls pls

Jan 15, 2011 | HP L1740 17" LCD Monitor

2 Answers

Monitor goes blank after showing XP logo screen (black screen with the xp logo right after boot up screens)


There are different reasons why this might happen. Let's try some. 1.) Does your board have an onboard video card, cause if it does, then XP might be using that as the primary monitor. TRy plugging into the onboard video when you start up! If that works then you need to disable the onboard video.(try disabling it in bios!) if not then 2.)When booting at the select xp or recovery console, press F8. You'll get the menu with safe mode and what not. Go down to Enable VGA Mode then press enter. If that works, go to display settings and lower your resolution then restart. But usually when this happens your monitor says "Out of Range" but u can still try Well if that doesn't work, tell me more! Regards, Armando

Apr 28, 2007 | XFX GeForce FX 6800 (256 MB) Graphic Card

Not finding what you are looking for?
HP 17 1740 DVI Rotating LCD Monitor w/USB Hub Silver/Black - Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...