follow this steps and fix it. God bless you
power problems if the console on the elliptical machine does not light up. Make
sure that the plug for the machine is secure in the outlet. If it is plugged
in, ensure that the outlet is receiving power. Check the breaker to make sure
it has not tripped off.
Be sure that you are using the correct adapter that came with the elliptical
machine. Because different adapters are able to handle differing amounts of
energy, the wrong adapter will not transfer electricity like it should. If the
adapter is pinched or damaged, this could also alter its effectiveness.
sure the correct adapter is being used if the resistance settings seem to be
too hard or too easy. If the correct adapter is being used, reset the machine.
To reset the machine, either switch the "On/Off" button or unplug the
machine from the wall. Doing this will allow the device to reset itself to the
default resistance. Turn on or plug the device back into the wall and retry all
of the levels of resistance.
not be concerned if you see small particles left on the guide rails. Over time,
the roller wheels gradually wear down. When this occurs, they leave residue on
the rails. Because this is considered to be normal wear, all you need to do to
fix the problem is wipe the rails off with a damp cloth.
the risk of receiving erratic readouts on the monitors by avoiding outside
interference. For example, gripping the heart rate handlebars too tightly can
affect the monitor. Similarly, the heart rate grips can be rendered less
effective when there is too much vibration. Consider not holding these monitors
throughout the workout to minimize vibration. The readouts also can be affected
by jewelry. To minimize errors, take off rings and other jewelry before working
out on an elliptical machine.